webrtc_m130/webrtc/modules/congestion_controller/probe_controller.cc

/*
 *  Copyright (c) 2016 The WebRTC project authors. All Rights Reserved.
 *
 *  Use of this source code is governed by a BSD-style license
 *  that can be found in the LICENSE file in the root of the source
 *  tree. An additional intellectual property rights grant can be found
 *  in the file PATENTS.  All contributing project authors may
 *  be found in the AUTHORS file in the root of the source tree.
 */

#include "webrtc/modules/congestion_controller/probe_controller.h"

#include <algorithm>
#include <initializer_list>

#include "webrtc/base/logging.h"
#include "webrtc/system_wrappers/include/metrics.h"

namespace webrtc {

namespace {

// Number of deltas between probes per cluster. On the very first cluster,
// we will need kProbeDeltasPerCluster + 1 probes, but on a cluster following
// another, we need kProbeDeltasPerCluster probes.
constexpr int kProbeDeltasPerCluster = 5;

// Maximum waiting time from the time of initiating probing to getting
// the measured results back.
constexpr int64_t kMaxWaitingTimeForProbingResultMs = 1000;

// Value of |min_bitrate_to_probe_further_bps_| that indicates
// further probing is disabled.
constexpr int kExponentialProbingDisabled = 0;

// Default probing bitrate limit. Applied only when the application didn't
// specify max bitrate.
constexpr int kDefaultMaxProbingBitrateBps = 5000000;

// This is a limit on how often probing can be done when there is a BW
// drop detected in ALR.
constexpr int64_t kAlrProbingIntervalMinMs = 5000;

// Interval between probes when ALR periodic probing is enabled.
constexpr int64_t kAlrPeriodicProbingIntervalMs = 5000;

// Minimum probe bitrate percentage to probe further for repeated probes.
constexpr int kRepeatedProbeMinPercentage = 125;

}  // namespace

ProbeController::ProbeController(PacedSender* pacer, Clock* clock)
    : pacer_(pacer),
      clock_(clock),
      network_state_(kNetworkUp),
      state_(State::kInit),
      min_bitrate_to_probe_further_bps_(kExponentialProbingDisabled),
      time_last_probing_initiated_ms_(0),
      estimated_bitrate_bps_(0),
      start_bitrate_bps_(0),
      max_bitrate_bps_(0),
      last_alr_probing_time_(clock_->TimeInMilliseconds()),
      enable_periodic_alr_probing_(false) {}

void ProbeController::SetBitrates(int min_bitrate_bps,
                                  int start_bitrate_bps,
                                  int max_bitrate_bps) {
  rtc::CritScope cs(&critsect_);

  if (start_bitrate_bps > 0)  {
    start_bitrate_bps_ = start_bitrate_bps;
  } else if (start_bitrate_bps_ == 0) {
    start_bitrate_bps_ = min_bitrate_bps;
  }

  int old_max_bitrate_bps = max_bitrate_bps_;
  max_bitrate_bps_ = max_bitrate_bps;

  switch (state_) {
    case State::kInit:
      if (network_state_ == kNetworkUp)
        InitiateExponentialProbing();
      break;

    case State::kWaitingForProbingResult:
      break;

    case State::kProbingComplete:
      // Initiate probing when |max_bitrate_| was increased mid-call.
      if (estimated_bitrate_bps_ != 0 &&
          estimated_bitrate_bps_ < old_max_bitrate_bps &&
          max_bitrate_bps_ > old_max_bitrate_bps) {
        InitiateProbing(clock_->TimeInMilliseconds(), {max_bitrate_bps},
                        kExponentialProbingDisabled);
      }
      break;
  }
}

void ProbeController::OnNetworkStateChanged(NetworkState network_state) {
  rtc::CritScope cs(&critsect_);
  network_state_ = network_state;
  if (network_state_ == kNetworkUp && state_ == State::kInit)
    InitiateExponentialProbing();
}

void ProbeController::InitiateExponentialProbing() {
  RTC_DCHECK(network_state_ == kNetworkUp);
  RTC_DCHECK(state_ == State::kInit);
  RTC_DCHECK_GT(start_bitrate_bps_, 0);

  // When probing at 1.8 Mbps ( 6x 300), this represents a threshold of
  // 1.2 Mbps to continue probing.
  InitiateProbing(clock_->TimeInMilliseconds(),
                  {3 * start_bitrate_bps_, 6 * start_bitrate_bps_},
                  4 * start_bitrate_bps_);
}

void ProbeController::SetEstimatedBitrate(int bitrate_bps) {
  rtc::CritScope cs(&critsect_);
  int64_t now_ms = clock_->TimeInMilliseconds();

  if (state_ == State::kWaitingForProbingResult) {
    if ((now_ms - time_last_probing_initiated_ms_) >
        kMaxWaitingTimeForProbingResultMs) {
      LOG(LS_INFO) << "kWaitingForProbingResult: timeout";
      state_ = State::kProbingComplete;
      min_bitrate_to_probe_further_bps_ = kExponentialProbingDisabled;
    } else {
      // Continue probing if probing results indicate channel has greater
      // capacity.
      LOG(LS_INFO) << "Measured bitrate: " << bitrate_bps
                   << " Minimum to probe further: "
                   << min_bitrate_to_probe_further_bps_;
      if (min_bitrate_to_probe_further_bps_ != kExponentialProbingDisabled &&
          bitrate_bps > min_bitrate_to_probe_further_bps_) {
        // Double the probing bitrate and expect a minimum of 25% gain to
        // continue probing.
        InitiateProbing(now_ms, {2 * bitrate_bps},
                        bitrate_bps * kRepeatedProbeMinPercentage / 100);
      } else {
        // Stop exponential probing.
        state_ = State::kProbingComplete;
        min_bitrate_to_probe_further_bps_ = kExponentialProbingDisabled;
      }
    }
  }

  // Detect a drop in estimated BW when operating in ALR and not already
  // probing. The current response is to initiate a single probe session at the
  // previous bitrate and immediately use the reported bitrate as the new
  // bitrate.
  //
  // If the probe session fails, the assumption is that this drop was a
  // real one from a competing flow or something else on the network and
  // it ramps up from bitrate_bps.
  if (state_ == State::kProbingComplete &&
      pacer_->GetApplicationLimitedRegionStartTime() &&
      bitrate_bps < estimated_bitrate_bps_ / 2 &&
      (now_ms - last_alr_probing_time_) > kAlrProbingIntervalMinMs) {
    LOG(LS_INFO) << "Detected big BW drop in ALR, start probe.";
    // Track how often we probe in response to BW drop in ALR.
    RTC_HISTOGRAM_COUNTS_10000("WebRTC.BWE.AlrProbingIntervalInS",
                               (now_ms - last_alr_probing_time_) / 1000);
    InitiateProbing(now_ms, {estimated_bitrate_bps_},
                    kExponentialProbingDisabled);
    last_alr_probing_time_ = now_ms;

    // TODO(isheriff): May want to track when we did ALR probing in order
    // to reset |last_alr_probing_time_| if we validate that it was a
    // drop due to exogenous event.
  }

  estimated_bitrate_bps_ = bitrate_bps;
}

void ProbeController::EnablePeriodicAlrProbing(bool enable) {
  rtc::CritScope cs(&critsect_);
  enable_periodic_alr_probing_ = enable;
}

void ProbeController::Process() {
  rtc::CritScope cs(&critsect_);

  if (state_ != State::kProbingComplete || !enable_periodic_alr_probing_)
    return;

  // Probe bandwidth periodically when in ALR state.
  rtc::Optional<int64_t> alr_start_time =
      pacer_->GetApplicationLimitedRegionStartTime();
  if (alr_start_time) {
    int64_t now_ms = clock_->TimeInMilliseconds();
    int64_t next_probe_time_ms =
        std::max(*alr_start_time, time_last_probing_initiated_ms_) +
        kAlrPeriodicProbingIntervalMs;
    if (now_ms >= next_probe_time_ms) {
      InitiateProbing(
          now_ms, {estimated_bitrate_bps_ * 2},
          estimated_bitrate_bps_ * kRepeatedProbeMinPercentage / 100);
    }
  }
}

void ProbeController::InitiateProbing(
    int64_t now_ms,
    std::initializer_list<int> bitrates_to_probe,
    int min_bitrate_to_probe_further_bps) {
  bool first_cluster = true;
  for (int bitrate : bitrates_to_probe) {
    int max_probe_bitrate_bps =
        max_bitrate_bps_ > 0 ? max_bitrate_bps_ : kDefaultMaxProbingBitrateBps;
    bitrate = std::min(bitrate, max_probe_bitrate_bps);
    if (first_cluster) {
      pacer_->CreateProbeCluster(bitrate, kProbeDeltasPerCluster + 1);
      first_cluster = false;
    } else {
      pacer_->CreateProbeCluster(bitrate, kProbeDeltasPerCluster);
    }
  }
  min_bitrate_to_probe_further_bps_ = min_bitrate_to_probe_further_bps;
  time_last_probing_initiated_ms_ = now_ms;
  if (min_bitrate_to_probe_further_bps == kExponentialProbingDisabled)
    state_ = State::kProbingComplete;
  else
    state_ = State::kWaitingForProbingResult;
}

}  // namespace webrtc