2011-07-07 08:21:25 +00:00
|
|
|
/*
|
2012-03-29 10:39:44 +00:00
|
|
|
* Copyright (c) 2012 The WebRTC project authors. All Rights Reserved.
|
2011-07-07 08:21:25 +00:00
|
|
|
*
|
|
|
|
|
* Use of this source code is governed by a BSD-style license
|
|
|
|
|
* that can be found in the LICENSE file in the root of the source
|
|
|
|
|
* tree. An additional intellectual property rights grant can be found
|
|
|
|
|
* in the file PATENTS. All contributing project authors may
|
|
|
|
|
* be found in the AUTHORS file in the root of the source tree.
|
|
|
|
|
*/
|
|
|
|
|
|
2013-05-21 13:52:32 +00:00
|
|
|
#include "webrtc/voice_engine/utility.h"
|
2011-07-07 08:21:25 +00:00
|
|
|
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
#include "webrtc/common_audio/resampler/include/push_resampler.h"
|
2013-05-21 13:52:32 +00:00
|
|
|
#include "webrtc/common_audio/signal_processing/include/signal_processing_library.h"
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
#include "webrtc/common_types.h"
|
|
|
|
|
#include "webrtc/modules/interface/module_common_types.h"
|
|
|
|
|
#include "webrtc/modules/utility/interface/audio_frame_operations.h"
|
|
|
|
|
#include "webrtc/system_wrappers/interface/logging.h"
|
|
|
|
|
#include "webrtc/voice_engine/voice_engine_defines.h"
|
2011-07-07 08:21:25 +00:00
|
|
|
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
namespace webrtc {
|
|
|
|
|
namespace voe {
|
2011-07-07 08:21:25 +00:00
|
|
|
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
// TODO(ajm): There is significant overlap between RemixAndResample and
|
2014-10-27 18:18:17 +00:00
|
|
|
// ConvertToCodecFormat. Consolidate using AudioConverter.
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
void RemixAndResample(const AudioFrame& src_frame,
|
2014-04-19 00:32:07 +00:00
|
|
|
PushResampler<int16_t>* resampler,
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
AudioFrame* dst_frame) {
|
|
|
|
|
const int16_t* audio_ptr = src_frame.data_;
|
|
|
|
|
int audio_ptr_num_channels = src_frame.num_channels_;
|
|
|
|
|
int16_t mono_audio[AudioFrame::kMaxDataSizeSamples];
|
|
|
|
|
|
|
|
|
|
// Downmix before resampling.
|
|
|
|
|
if (src_frame.num_channels_ == 2 && dst_frame->num_channels_ == 1) {
|
|
|
|
|
AudioFrameOperations::StereoToMono(src_frame.data_,
|
|
|
|
|
src_frame.samples_per_channel_,
|
|
|
|
|
mono_audio);
|
|
|
|
|
audio_ptr = mono_audio;
|
|
|
|
|
audio_ptr_num_channels = 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (resampler->InitializeIfNeeded(src_frame.sample_rate_hz_,
|
|
|
|
|
dst_frame->sample_rate_hz_,
|
|
|
|
|
audio_ptr_num_channels) == -1) {
|
|
|
|
|
LOG_FERR3(LS_ERROR, InitializeIfNeeded, src_frame.sample_rate_hz_,
|
|
|
|
|
dst_frame->sample_rate_hz_, audio_ptr_num_channels);
|
|
|
|
|
assert(false);
|
|
|
|
|
}
|
|
|
|
|
|
Update a ton of audio code to use size_t more correctly and in general reduce
use of int16_t/uint16_t.
This is the upshot of a recommendation by henrik.lundin and kwiberg on an original small change ( https://webrtc-codereview.appspot.com/42569004/#ps1 ) to stop using int16_t just because values could fit in it, and is similar in nature to a previous "mass change to use size_t more" ( https://webrtc-codereview.appspot.com/23129004/ ) which also needed to be split up for review but to land all at once, since, like adding "const", such changes tend to cause a lot of transitive effects.
This was be reviewed and approved in pieces:
https://codereview.webrtc.org/1224093003
https://codereview.webrtc.org/1224123002
https://codereview.webrtc.org/1224163002
https://codereview.webrtc.org/1225133003
https://codereview.webrtc.org/1225173002
https://codereview.webrtc.org/1227163003
https://codereview.webrtc.org/1227203003
https://codereview.webrtc.org/1227213002
https://codereview.webrtc.org/1227893002
https://codereview.webrtc.org/1228793004
https://codereview.webrtc.org/1228803003
https://codereview.webrtc.org/1228823002
https://codereview.webrtc.org/1228823003
https://codereview.webrtc.org/1228843002
https://codereview.webrtc.org/1230693002
https://codereview.webrtc.org/1231713002
The change is being landed as TBR to all the folks who reviewed the above.
BUG=chromium:81439
TEST=none
R=andrew@webrtc.org, pbos@webrtc.org
TBR=aluebs, andrew, asapersson, henrika, hlundin, jan.skoglund, kwiberg, minyue, pbos, pthatcher
Review URL: https://codereview.webrtc.org/1230503003 .
Cr-Commit-Position: refs/heads/master@{#9768}
2015-08-24 14:52:23 -07:00
|
|
|
const size_t src_length = src_frame.samples_per_channel_ *
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
audio_ptr_num_channels;
|
|
|
|
|
int out_length = resampler->Resample(audio_ptr, src_length, dst_frame->data_,
|
|
|
|
|
AudioFrame::kMaxDataSizeSamples);
|
|
|
|
|
if (out_length == -1) {
|
|
|
|
|
LOG_FERR3(LS_ERROR, Resample, audio_ptr, src_length, dst_frame->data_);
|
|
|
|
|
assert(false);
|
|
|
|
|
}
|
Update a ton of audio code to use size_t more correctly and in general reduce
use of int16_t/uint16_t.
This is the upshot of a recommendation by henrik.lundin and kwiberg on an original small change ( https://webrtc-codereview.appspot.com/42569004/#ps1 ) to stop using int16_t just because values could fit in it, and is similar in nature to a previous "mass change to use size_t more" ( https://webrtc-codereview.appspot.com/23129004/ ) which also needed to be split up for review but to land all at once, since, like adding "const", such changes tend to cause a lot of transitive effects.
This was be reviewed and approved in pieces:
https://codereview.webrtc.org/1224093003
https://codereview.webrtc.org/1224123002
https://codereview.webrtc.org/1224163002
https://codereview.webrtc.org/1225133003
https://codereview.webrtc.org/1225173002
https://codereview.webrtc.org/1227163003
https://codereview.webrtc.org/1227203003
https://codereview.webrtc.org/1227213002
https://codereview.webrtc.org/1227893002
https://codereview.webrtc.org/1228793004
https://codereview.webrtc.org/1228803003
https://codereview.webrtc.org/1228823002
https://codereview.webrtc.org/1228823003
https://codereview.webrtc.org/1228843002
https://codereview.webrtc.org/1230693002
https://codereview.webrtc.org/1231713002
The change is being landed as TBR to all the folks who reviewed the above.
BUG=chromium:81439
TEST=none
R=andrew@webrtc.org, pbos@webrtc.org
TBR=aluebs, andrew, asapersson, henrika, hlundin, jan.skoglund, kwiberg, minyue, pbos, pthatcher
Review URL: https://codereview.webrtc.org/1230503003 .
Cr-Commit-Position: refs/heads/master@{#9768}
2015-08-24 14:52:23 -07:00
|
|
|
dst_frame->samples_per_channel_ =
|
|
|
|
|
static_cast<size_t>(out_length / audio_ptr_num_channels);
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
|
|
|
|
|
// Upmix after resampling.
|
|
|
|
|
if (src_frame.num_channels_ == 1 && dst_frame->num_channels_ == 2) {
|
|
|
|
|
// The audio in dst_frame really is mono at this point; MonoToStereo will
|
|
|
|
|
// set this back to stereo.
|
|
|
|
|
dst_frame->num_channels_ = 1;
|
|
|
|
|
AudioFrameOperations::MonoToStereo(dst_frame);
|
|
|
|
|
}
|
2014-06-05 20:34:08 +00:00
|
|
|
|
|
|
|
|
dst_frame->timestamp_ = src_frame.timestamp_;
|
|
|
|
|
dst_frame->elapsed_time_ms_ = src_frame.elapsed_time_ms_;
|
|
|
|
|
dst_frame->ntp_time_ms_ = src_frame.ntp_time_ms_;
|
2011-07-07 08:21:25 +00:00
|
|
|
}
|
|
|
|
|
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
void DownConvertToCodecFormat(const int16_t* src_data,
|
Update a ton of audio code to use size_t more correctly and in general reduce
use of int16_t/uint16_t.
This is the upshot of a recommendation by henrik.lundin and kwiberg on an original small change ( https://webrtc-codereview.appspot.com/42569004/#ps1 ) to stop using int16_t just because values could fit in it, and is similar in nature to a previous "mass change to use size_t more" ( https://webrtc-codereview.appspot.com/23129004/ ) which also needed to be split up for review but to land all at once, since, like adding "const", such changes tend to cause a lot of transitive effects.
This was be reviewed and approved in pieces:
https://codereview.webrtc.org/1224093003
https://codereview.webrtc.org/1224123002
https://codereview.webrtc.org/1224163002
https://codereview.webrtc.org/1225133003
https://codereview.webrtc.org/1225173002
https://codereview.webrtc.org/1227163003
https://codereview.webrtc.org/1227203003
https://codereview.webrtc.org/1227213002
https://codereview.webrtc.org/1227893002
https://codereview.webrtc.org/1228793004
https://codereview.webrtc.org/1228803003
https://codereview.webrtc.org/1228823002
https://codereview.webrtc.org/1228823003
https://codereview.webrtc.org/1228843002
https://codereview.webrtc.org/1230693002
https://codereview.webrtc.org/1231713002
The change is being landed as TBR to all the folks who reviewed the above.
BUG=chromium:81439
TEST=none
R=andrew@webrtc.org, pbos@webrtc.org
TBR=aluebs, andrew, asapersson, henrika, hlundin, jan.skoglund, kwiberg, minyue, pbos, pthatcher
Review URL: https://codereview.webrtc.org/1230503003 .
Cr-Commit-Position: refs/heads/master@{#9768}
2015-08-24 14:52:23 -07:00
|
|
|
size_t samples_per_channel,
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
int num_channels,
|
|
|
|
|
int sample_rate_hz,
|
|
|
|
|
int codec_num_channels,
|
|
|
|
|
int codec_rate_hz,
|
|
|
|
|
int16_t* mono_buffer,
|
2014-04-19 00:32:07 +00:00
|
|
|
PushResampler<int16_t>* resampler,
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
AudioFrame* dst_af) {
|
|
|
|
|
assert(samples_per_channel <= kMaxMonoDataSizeSamples);
|
|
|
|
|
assert(num_channels == 1 || num_channels == 2);
|
|
|
|
|
assert(codec_num_channels == 1 || codec_num_channels == 2);
|
2014-05-30 17:28:50 +00:00
|
|
|
dst_af->Reset();
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
|
|
|
|
|
// Never upsample the capture signal here. This should be done at the
|
|
|
|
|
// end of the send chain.
|
|
|
|
|
int destination_rate = std::min(codec_rate_hz, sample_rate_hz);
|
|
|
|
|
|
|
|
|
|
// If no stereo codecs are in use, we downmix a stereo stream from the
|
|
|
|
|
// device early in the chain, before resampling.
|
|
|
|
|
if (num_channels == 2 && codec_num_channels == 1) {
|
|
|
|
|
AudioFrameOperations::StereoToMono(src_data, samples_per_channel,
|
|
|
|
|
mono_buffer);
|
|
|
|
|
src_data = mono_buffer;
|
|
|
|
|
num_channels = 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (resampler->InitializeIfNeeded(
|
|
|
|
|
sample_rate_hz, destination_rate, num_channels) != 0) {
|
|
|
|
|
LOG_FERR3(LS_ERROR,
|
|
|
|
|
InitializeIfNeeded,
|
|
|
|
|
sample_rate_hz,
|
|
|
|
|
destination_rate,
|
|
|
|
|
num_channels);
|
|
|
|
|
assert(false);
|
|
|
|
|
}
|
|
|
|
|
|
Update a ton of audio code to use size_t more correctly and in general reduce
use of int16_t/uint16_t.
This is the upshot of a recommendation by henrik.lundin and kwiberg on an original small change ( https://webrtc-codereview.appspot.com/42569004/#ps1 ) to stop using int16_t just because values could fit in it, and is similar in nature to a previous "mass change to use size_t more" ( https://webrtc-codereview.appspot.com/23129004/ ) which also needed to be split up for review but to land all at once, since, like adding "const", such changes tend to cause a lot of transitive effects.
This was be reviewed and approved in pieces:
https://codereview.webrtc.org/1224093003
https://codereview.webrtc.org/1224123002
https://codereview.webrtc.org/1224163002
https://codereview.webrtc.org/1225133003
https://codereview.webrtc.org/1225173002
https://codereview.webrtc.org/1227163003
https://codereview.webrtc.org/1227203003
https://codereview.webrtc.org/1227213002
https://codereview.webrtc.org/1227893002
https://codereview.webrtc.org/1228793004
https://codereview.webrtc.org/1228803003
https://codereview.webrtc.org/1228823002
https://codereview.webrtc.org/1228823003
https://codereview.webrtc.org/1228843002
https://codereview.webrtc.org/1230693002
https://codereview.webrtc.org/1231713002
The change is being landed as TBR to all the folks who reviewed the above.
BUG=chromium:81439
TEST=none
R=andrew@webrtc.org, pbos@webrtc.org
TBR=aluebs, andrew, asapersson, henrika, hlundin, jan.skoglund, kwiberg, minyue, pbos, pthatcher
Review URL: https://codereview.webrtc.org/1230503003 .
Cr-Commit-Position: refs/heads/master@{#9768}
2015-08-24 14:52:23 -07:00
|
|
|
const size_t in_length = samples_per_channel * num_channels;
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
int out_length = resampler->Resample(
|
|
|
|
|
src_data, in_length, dst_af->data_, AudioFrame::kMaxDataSizeSamples);
|
|
|
|
|
if (out_length == -1) {
|
|
|
|
|
LOG_FERR3(LS_ERROR, Resample, src_data, in_length, dst_af->data_);
|
|
|
|
|
assert(false);
|
|
|
|
|
}
|
|
|
|
|
|
Update a ton of audio code to use size_t more correctly and in general reduce
use of int16_t/uint16_t.
This is the upshot of a recommendation by henrik.lundin and kwiberg on an original small change ( https://webrtc-codereview.appspot.com/42569004/#ps1 ) to stop using int16_t just because values could fit in it, and is similar in nature to a previous "mass change to use size_t more" ( https://webrtc-codereview.appspot.com/23129004/ ) which also needed to be split up for review but to land all at once, since, like adding "const", such changes tend to cause a lot of transitive effects.
This was be reviewed and approved in pieces:
https://codereview.webrtc.org/1224093003
https://codereview.webrtc.org/1224123002
https://codereview.webrtc.org/1224163002
https://codereview.webrtc.org/1225133003
https://codereview.webrtc.org/1225173002
https://codereview.webrtc.org/1227163003
https://codereview.webrtc.org/1227203003
https://codereview.webrtc.org/1227213002
https://codereview.webrtc.org/1227893002
https://codereview.webrtc.org/1228793004
https://codereview.webrtc.org/1228803003
https://codereview.webrtc.org/1228823002
https://codereview.webrtc.org/1228823003
https://codereview.webrtc.org/1228843002
https://codereview.webrtc.org/1230693002
https://codereview.webrtc.org/1231713002
The change is being landed as TBR to all the folks who reviewed the above.
BUG=chromium:81439
TEST=none
R=andrew@webrtc.org, pbos@webrtc.org
TBR=aluebs, andrew, asapersson, henrika, hlundin, jan.skoglund, kwiberg, minyue, pbos, pthatcher
Review URL: https://codereview.webrtc.org/1230503003 .
Cr-Commit-Position: refs/heads/master@{#9768}
2015-08-24 14:52:23 -07:00
|
|
|
dst_af->samples_per_channel_ = static_cast<size_t>(out_length / num_channels);
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
dst_af->sample_rate_hz_ = destination_rate;
|
|
|
|
|
dst_af->num_channels_ = num_channels;
|
2011-07-07 08:21:25 +00:00
|
|
|
}
|
|
|
|
|
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
void MixWithSat(int16_t target[],
|
|
|
|
|
int target_channel,
|
|
|
|
|
const int16_t source[],
|
|
|
|
|
int source_channel,
|
Update a ton of audio code to use size_t more correctly and in general reduce
use of int16_t/uint16_t.
This is the upshot of a recommendation by henrik.lundin and kwiberg on an original small change ( https://webrtc-codereview.appspot.com/42569004/#ps1 ) to stop using int16_t just because values could fit in it, and is similar in nature to a previous "mass change to use size_t more" ( https://webrtc-codereview.appspot.com/23129004/ ) which also needed to be split up for review but to land all at once, since, like adding "const", such changes tend to cause a lot of transitive effects.
This was be reviewed and approved in pieces:
https://codereview.webrtc.org/1224093003
https://codereview.webrtc.org/1224123002
https://codereview.webrtc.org/1224163002
https://codereview.webrtc.org/1225133003
https://codereview.webrtc.org/1225173002
https://codereview.webrtc.org/1227163003
https://codereview.webrtc.org/1227203003
https://codereview.webrtc.org/1227213002
https://codereview.webrtc.org/1227893002
https://codereview.webrtc.org/1228793004
https://codereview.webrtc.org/1228803003
https://codereview.webrtc.org/1228823002
https://codereview.webrtc.org/1228823003
https://codereview.webrtc.org/1228843002
https://codereview.webrtc.org/1230693002
https://codereview.webrtc.org/1231713002
The change is being landed as TBR to all the folks who reviewed the above.
BUG=chromium:81439
TEST=none
R=andrew@webrtc.org, pbos@webrtc.org
TBR=aluebs, andrew, asapersson, henrika, hlundin, jan.skoglund, kwiberg, minyue, pbos, pthatcher
Review URL: https://codereview.webrtc.org/1230503003 .
Cr-Commit-Position: refs/heads/master@{#9768}
2015-08-24 14:52:23 -07:00
|
|
|
size_t source_len) {
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
assert(target_channel == 1 || target_channel == 2);
|
|
|
|
|
assert(source_channel == 1 || source_channel == 2);
|
|
|
|
|
|
|
|
|
|
if (target_channel == 2 && source_channel == 1) {
|
|
|
|
|
// Convert source from mono to stereo.
|
|
|
|
|
int32_t left = 0;
|
|
|
|
|
int32_t right = 0;
|
Update a ton of audio code to use size_t more correctly and in general reduce
use of int16_t/uint16_t.
This is the upshot of a recommendation by henrik.lundin and kwiberg on an original small change ( https://webrtc-codereview.appspot.com/42569004/#ps1 ) to stop using int16_t just because values could fit in it, and is similar in nature to a previous "mass change to use size_t more" ( https://webrtc-codereview.appspot.com/23129004/ ) which also needed to be split up for review but to land all at once, since, like adding "const", such changes tend to cause a lot of transitive effects.
This was be reviewed and approved in pieces:
https://codereview.webrtc.org/1224093003
https://codereview.webrtc.org/1224123002
https://codereview.webrtc.org/1224163002
https://codereview.webrtc.org/1225133003
https://codereview.webrtc.org/1225173002
https://codereview.webrtc.org/1227163003
https://codereview.webrtc.org/1227203003
https://codereview.webrtc.org/1227213002
https://codereview.webrtc.org/1227893002
https://codereview.webrtc.org/1228793004
https://codereview.webrtc.org/1228803003
https://codereview.webrtc.org/1228823002
https://codereview.webrtc.org/1228823003
https://codereview.webrtc.org/1228843002
https://codereview.webrtc.org/1230693002
https://codereview.webrtc.org/1231713002
The change is being landed as TBR to all the folks who reviewed the above.
BUG=chromium:81439
TEST=none
R=andrew@webrtc.org, pbos@webrtc.org
TBR=aluebs, andrew, asapersson, henrika, hlundin, jan.skoglund, kwiberg, minyue, pbos, pthatcher
Review URL: https://codereview.webrtc.org/1230503003 .
Cr-Commit-Position: refs/heads/master@{#9768}
2015-08-24 14:52:23 -07:00
|
|
|
for (size_t i = 0; i < source_len; ++i) {
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
left = source[i] + target[i * 2];
|
|
|
|
|
right = source[i] + target[i * 2 + 1];
|
|
|
|
|
target[i * 2] = WebRtcSpl_SatW32ToW16(left);
|
|
|
|
|
target[i * 2 + 1] = WebRtcSpl_SatW32ToW16(right);
|
|
|
|
|
}
|
|
|
|
|
} else if (target_channel == 1 && source_channel == 2) {
|
|
|
|
|
// Convert source from stereo to mono.
|
|
|
|
|
int32_t temp = 0;
|
Update a ton of audio code to use size_t more correctly and in general reduce
use of int16_t/uint16_t.
This is the upshot of a recommendation by henrik.lundin and kwiberg on an original small change ( https://webrtc-codereview.appspot.com/42569004/#ps1 ) to stop using int16_t just because values could fit in it, and is similar in nature to a previous "mass change to use size_t more" ( https://webrtc-codereview.appspot.com/23129004/ ) which also needed to be split up for review but to land all at once, since, like adding "const", such changes tend to cause a lot of transitive effects.
This was be reviewed and approved in pieces:
https://codereview.webrtc.org/1224093003
https://codereview.webrtc.org/1224123002
https://codereview.webrtc.org/1224163002
https://codereview.webrtc.org/1225133003
https://codereview.webrtc.org/1225173002
https://codereview.webrtc.org/1227163003
https://codereview.webrtc.org/1227203003
https://codereview.webrtc.org/1227213002
https://codereview.webrtc.org/1227893002
https://codereview.webrtc.org/1228793004
https://codereview.webrtc.org/1228803003
https://codereview.webrtc.org/1228823002
https://codereview.webrtc.org/1228823003
https://codereview.webrtc.org/1228843002
https://codereview.webrtc.org/1230693002
https://codereview.webrtc.org/1231713002
The change is being landed as TBR to all the folks who reviewed the above.
BUG=chromium:81439
TEST=none
R=andrew@webrtc.org, pbos@webrtc.org
TBR=aluebs, andrew, asapersson, henrika, hlundin, jan.skoglund, kwiberg, minyue, pbos, pthatcher
Review URL: https://codereview.webrtc.org/1230503003 .
Cr-Commit-Position: refs/heads/master@{#9768}
2015-08-24 14:52:23 -07:00
|
|
|
for (size_t i = 0; i < source_len / 2; ++i) {
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
temp = ((source[i * 2] + source[i * 2 + 1]) >> 1) + target[i];
|
|
|
|
|
target[i] = WebRtcSpl_SatW32ToW16(temp);
|
2011-07-07 08:21:25 +00:00
|
|
|
}
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
} else {
|
|
|
|
|
int32_t temp = 0;
|
Update a ton of audio code to use size_t more correctly and in general reduce
use of int16_t/uint16_t.
This is the upshot of a recommendation by henrik.lundin and kwiberg on an original small change ( https://webrtc-codereview.appspot.com/42569004/#ps1 ) to stop using int16_t just because values could fit in it, and is similar in nature to a previous "mass change to use size_t more" ( https://webrtc-codereview.appspot.com/23129004/ ) which also needed to be split up for review but to land all at once, since, like adding "const", such changes tend to cause a lot of transitive effects.
This was be reviewed and approved in pieces:
https://codereview.webrtc.org/1224093003
https://codereview.webrtc.org/1224123002
https://codereview.webrtc.org/1224163002
https://codereview.webrtc.org/1225133003
https://codereview.webrtc.org/1225173002
https://codereview.webrtc.org/1227163003
https://codereview.webrtc.org/1227203003
https://codereview.webrtc.org/1227213002
https://codereview.webrtc.org/1227893002
https://codereview.webrtc.org/1228793004
https://codereview.webrtc.org/1228803003
https://codereview.webrtc.org/1228823002
https://codereview.webrtc.org/1228823003
https://codereview.webrtc.org/1228843002
https://codereview.webrtc.org/1230693002
https://codereview.webrtc.org/1231713002
The change is being landed as TBR to all the folks who reviewed the above.
BUG=chromium:81439
TEST=none
R=andrew@webrtc.org, pbos@webrtc.org
TBR=aluebs, andrew, asapersson, henrika, hlundin, jan.skoglund, kwiberg, minyue, pbos, pthatcher
Review URL: https://codereview.webrtc.org/1230503003 .
Cr-Commit-Position: refs/heads/master@{#9768}
2015-08-24 14:52:23 -07:00
|
|
|
for (size_t i = 0; i < source_len; ++i) {
|
Consolidate audio conversion from Channel and TransmitMixer.
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-04-03 21:56:01 +00:00
|
|
|
temp = source[i] + target[i];
|
|
|
|
|
target[i] = WebRtcSpl_SatW32ToW16(temp);
|
|
|
|
|
}
|
|
|
|
|
}
|
2011-07-07 08:21:25 +00:00
|
|
|
}
|
|
|
|
|
|
2013-07-03 15:12:26 +00:00
|
|
|
} // namespace voe
|
|
|
|
|
} // namespace webrtc
|