webrtc_m130/modules/video_coding/codecs/vp8/libvpx_vp8_encoder.cc

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1351 lines
52 KiB
C++
Raw Normal View History

/*
* Copyright (c) 2012 The WebRTC project authors. All Rights Reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#include "modules/video_coding/codecs/vp8/libvpx_vp8_encoder.h"
#include <assert.h>
#include <string.h>
#include <algorithm>
#include <cstdint>
#include <iterator>
#include <memory>
#include <string>
#include <utility>
#include <vector>
#include "api/scoped_refptr.h"
#include "api/video/video_content_type.h"
#include "api/video/video_frame_buffer.h"
#include "api/video/video_timing.h"
#include "api/video_codecs/vp8_temporal_layers.h"
#include "api/video_codecs/vp8_temporal_layers_factory.h"
#include "modules/video_coding/codecs/interface/common_constants.h"
#include "modules/video_coding/codecs/vp8/include/vp8.h"
#include "modules/video_coding/include/video_error_codes.h"
#include "modules/video_coding/utility/simulcast_rate_allocator.h"
#include "modules/video_coding/utility/simulcast_utility.h"
#include "rtc_base/checks.h"
#include "rtc_base/experiments/field_trial_parser.h"
#include "rtc_base/experiments/field_trial_units.h"
#include "rtc_base/logging.h"
#include "rtc_base/trace_event.h"
#include "system_wrappers/include/field_trial.h"
#include "third_party/libyuv/include/libyuv/scale.h"
#include "vpx/vp8cx.h"
namespace webrtc {
namespace {
#if defined(WEBRTC_IOS)
constexpr char kVP8IosMaxNumberOfThreadFieldTrial[] =
"WebRTC-VP8IosMaxNumberOfThread";
constexpr char kVP8IosMaxNumberOfThreadFieldTrialParameter[] = "max_thread";
#endif
constexpr char kVp8GetEncoderInfoOverrideFieldTrial[] =
"WebRTC-VP8-GetEncoderInfoOverride";
constexpr char kVp8RequestedResolutionAlignmentFieldTrialParameter[] =
"requested_resolution_alignment";
constexpr char kVp8ForcePartitionResilience[] =
"WebRTC-VP8-ForcePartitionResilience";
// QP is obtained from VP8-bitstream for HW, so the QP corresponds to the
// bitstream range of [0, 127] and not the user-level range of [0,63].
constexpr int kLowVp8QpThreshold = 29;
constexpr int kHighVp8QpThreshold = 95;
constexpr int kTokenPartitions = VP8_ONE_TOKENPARTITION;
constexpr uint32_t kVp832ByteAlign = 32u;
constexpr int kRtpTicksPerSecond = 90000;
constexpr int kRtpTicksPerMs = kRtpTicksPerSecond / 1000;
// VP8 denoiser states.
enum denoiserState : uint32_t {
kDenoiserOff,
kDenoiserOnYOnly,
kDenoiserOnYUV,
kDenoiserOnYUVAggressive,
// Adaptive mode defaults to kDenoiserOnYUV on key frame, but may switch
// to kDenoiserOnYUVAggressive based on a computed noise metric.
kDenoiserOnAdaptive
};
// Greatest common divisior
int GCD(int a, int b) {
int c = a % b;
while (c != 0) {
a = b;
b = c;
c = a % b;
}
return b;
}
static_assert(Vp8EncoderConfig::TemporalLayerConfig::kMaxPeriodicity ==
VPX_TS_MAX_PERIODICITY,
"Vp8EncoderConfig::kMaxPeriodicity must be kept in sync with the "
"constant in libvpx.");
static_assert(Vp8EncoderConfig::TemporalLayerConfig::kMaxLayers ==
VPX_TS_MAX_LAYERS,
"Vp8EncoderConfig::kMaxLayers must be kept in sync with the "
"constant in libvpx.");
// Allow a newer value to override a current value only if the new value
// is set.
template <typename T>
bool MaybeSetNewValue(const absl::optional<T>& new_value,
absl::optional<T>* base_value) {
if (new_value.has_value() && new_value != *base_value) {
*base_value = new_value;
return true;
} else {
return false;
}
}
// Adds configuration from |new_config| to |base_config|. Both configs consist
// of optionals, and only optionals which are set in |new_config| can have
// an effect. (That is, set values in |base_config| cannot be unset.)
// Returns |true| iff any changes were made to |base_config|.
bool MaybeExtendVp8EncoderConfig(const Vp8EncoderConfig& new_config,
Vp8EncoderConfig* base_config) {
bool changes_made = false;
changes_made |= MaybeSetNewValue(new_config.temporal_layer_config,
&base_config->temporal_layer_config);
changes_made |= MaybeSetNewValue(new_config.rc_target_bitrate,
&base_config->rc_target_bitrate);
changes_made |= MaybeSetNewValue(new_config.rc_max_quantizer,
&base_config->rc_max_quantizer);
changes_made |= MaybeSetNewValue(new_config.g_error_resilient,
&base_config->g_error_resilient);
return changes_made;
}
void ApplyVp8EncoderConfigToVpxConfig(const Vp8EncoderConfig& encoder_config,
vpx_codec_enc_cfg_t* vpx_config) {
if (encoder_config.temporal_layer_config.has_value()) {
const Vp8EncoderConfig::TemporalLayerConfig& ts_config =
encoder_config.temporal_layer_config.value();
vpx_config->ts_number_layers = ts_config.ts_number_layers;
std::copy(ts_config.ts_target_bitrate.begin(),
ts_config.ts_target_bitrate.end(),
std::begin(vpx_config->ts_target_bitrate));
std::copy(ts_config.ts_rate_decimator.begin(),
ts_config.ts_rate_decimator.end(),
std::begin(vpx_config->ts_rate_decimator));
vpx_config->ts_periodicity = ts_config.ts_periodicity;
std::copy(ts_config.ts_layer_id.begin(), ts_config.ts_layer_id.end(),
std::begin(vpx_config->ts_layer_id));
} else {
vpx_config->ts_number_layers = 1;
vpx_config->ts_rate_decimator[0] = 1;
vpx_config->ts_periodicity = 1;
vpx_config->ts_layer_id[0] = 0;
}
if (encoder_config.rc_target_bitrate.has_value()) {
vpx_config->rc_target_bitrate = encoder_config.rc_target_bitrate.value();
}
if (encoder_config.rc_max_quantizer.has_value()) {
vpx_config->rc_max_quantizer = encoder_config.rc_max_quantizer.value();
}
if (encoder_config.g_error_resilient.has_value()) {
vpx_config->g_error_resilient = encoder_config.g_error_resilient.value();
}
}
absl::optional<int> GetRequestedResolutionAlignmentOverride() {
const std::string trial_string =
field_trial::FindFullName(kVp8GetEncoderInfoOverrideFieldTrial);
FieldTrialOptional<int> requested_resolution_alignment(
kVp8RequestedResolutionAlignmentFieldTrialParameter);
ParseFieldTrial({&requested_resolution_alignment}, trial_string);
return requested_resolution_alignment.GetOptional();
}
} // namespace
std::unique_ptr<VideoEncoder> VP8Encoder::Create() {
return std::make_unique<LibvpxVp8Encoder>(LibvpxInterface::Create(),
VP8Encoder::Settings());
}
std::unique_ptr<VideoEncoder> VP8Encoder::Create(
VP8Encoder::Settings settings) {
return std::make_unique<LibvpxVp8Encoder>(LibvpxInterface::Create(),
std::move(settings));
}
std::unique_ptr<VideoEncoder> VP8Encoder::Create(
std::unique_ptr<Vp8FrameBufferControllerFactory>
frame_buffer_controller_factory) {
VP8Encoder::Settings settings;
settings.frame_buffer_controller_factory =
std::move(frame_buffer_controller_factory);
return std::make_unique<LibvpxVp8Encoder>(LibvpxInterface::Create(),
std::move(settings));
}
vpx_enc_frame_flags_t LibvpxVp8Encoder::EncodeFlags(
const Vp8FrameConfig& references) {
RTC_DCHECK(!references.drop_frame);
vpx_enc_frame_flags_t flags = 0;
if ((references.last_buffer_flags &
Vp8FrameConfig::BufferFlags::kReference) == 0)
flags |= VP8_EFLAG_NO_REF_LAST;
if ((references.last_buffer_flags & Vp8FrameConfig::BufferFlags::kUpdate) ==
0)
flags |= VP8_EFLAG_NO_UPD_LAST;
if ((references.golden_buffer_flags &
Vp8FrameConfig::BufferFlags::kReference) == 0)
flags |= VP8_EFLAG_NO_REF_GF;
if ((references.golden_buffer_flags & Vp8FrameConfig::BufferFlags::kUpdate) ==
0)
flags |= VP8_EFLAG_NO_UPD_GF;
if ((references.arf_buffer_flags & Vp8FrameConfig::BufferFlags::kReference) ==
0)
flags |= VP8_EFLAG_NO_REF_ARF;
if ((references.arf_buffer_flags & Vp8FrameConfig::BufferFlags::kUpdate) == 0)
flags |= VP8_EFLAG_NO_UPD_ARF;
if (references.freeze_entropy)
flags |= VP8_EFLAG_NO_UPD_ENTROPY;
return flags;
}
LibvpxVp8Encoder::LibvpxVp8Encoder(std::unique_ptr<LibvpxInterface> interface,
VP8Encoder::Settings settings)
: libvpx_(std::move(interface)),
rate_control_settings_(RateControlSettings::ParseFromFieldTrials()),
requested_resolution_alignment_override_(
GetRequestedResolutionAlignmentOverride()),
frame_buffer_controller_factory_(
std::move(settings.frame_buffer_controller_factory)),
resolution_bitrate_limits_(std::move(settings.resolution_bitrate_limits)),
key_frame_request_(kMaxSimulcastStreams, false),
variable_framerate_experiment_(ParseVariableFramerateConfig(
"WebRTC-VP8VariableFramerateScreenshare")),
framerate_controller_(variable_framerate_experiment_.framerate_limit) {
// TODO(eladalon/ilnik): These reservations might be wasting memory.
// InitEncode() is resizing to the actual size, which might be smaller.
raw_images_.reserve(kMaxSimulcastStreams);
encoded_images_.reserve(kMaxSimulcastStreams);
send_stream_.reserve(kMaxSimulcastStreams);
cpu_speed_.assign(kMaxSimulcastStreams, cpu_speed_default_);
encoders_.reserve(kMaxSimulcastStreams);
vpx_configs_.reserve(kMaxSimulcastStreams);
config_overrides_.reserve(kMaxSimulcastStreams);
downsampling_factors_.reserve(kMaxSimulcastStreams);
}
LibvpxVp8Encoder::~LibvpxVp8Encoder() {
Release();
}
int LibvpxVp8Encoder::Release() {
int ret_val = WEBRTC_VIDEO_CODEC_OK;
encoded_images_.clear();
if (inited_) {
for (auto it = encoders_.rbegin(); it != encoders_.rend(); ++it) {
if (libvpx_->codec_destroy(&*it)) {
ret_val = WEBRTC_VIDEO_CODEC_MEMORY;
}
}
}
encoders_.clear();
vpx_configs_.clear();
config_overrides_.clear();
send_stream_.clear();
cpu_speed_.clear();
for (auto it = raw_images_.rbegin(); it != raw_images_.rend(); ++it) {
libvpx_->img_free(&*it);
}
raw_images_.clear();
frame_buffer_controller_.reset();
inited_ = false;
return ret_val;
}
void LibvpxVp8Encoder::SetRates(const RateControlParameters& parameters) {
if (!inited_) {
RTC_LOG(LS_WARNING) << "SetRates() while not initialize";
return;
}
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
if (encoders_[0].err) {
RTC_LOG(LS_WARNING) << "Encoder in error state.";
return;
}
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
if (parameters.framerate_fps < 1.0) {
RTC_LOG(LS_WARNING) << "Unsupported framerate (must be >= 1.0): "
<< parameters.framerate_fps;
return;
}
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
if (parameters.bitrate.get_sum_bps() == 0) {
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
// Encoder paused, turn off all encoding.
const int num_streams = static_cast<size_t>(encoders_.size());
for (int i = 0; i < num_streams; ++i)
SetStreamState(false, i);
return;
}
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
codec_.maxFramerate = static_cast<uint32_t>(parameters.framerate_fps + 0.5);
if (encoders_.size() > 1) {
// If we have more than 1 stream, reduce the qp_max for the low resolution
// stream if frame rate is not too low. The trade-off with lower qp_max is
// possibly more dropped frames, so we only do this if the frame rate is
// above some threshold (base temporal layer is down to 1/4 for 3 layers).
// We may want to condition this on bitrate later.
if (rate_control_settings_.Vp8BoostBaseLayerQuality() &&
parameters.framerate_fps > 20.0) {
vpx_configs_[encoders_.size() - 1].rc_max_quantizer = 45;
} else {
// Go back to default value set in InitEncode.
vpx_configs_[encoders_.size() - 1].rc_max_quantizer = qp_max_;
}
}
for (size_t i = 0; i < encoders_.size(); ++i) {
const size_t stream_idx = encoders_.size() - 1 - i;
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
unsigned int target_bitrate_kbps =
parameters.bitrate.GetSpatialLayerSum(stream_idx) / 1000;
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
bool send_stream = target_bitrate_kbps > 0;
if (send_stream || encoders_.size() > 1)
SetStreamState(send_stream, stream_idx);
vpx_configs_[i].rc_target_bitrate = target_bitrate_kbps;
if (send_stream) {
frame_buffer_controller_->OnRatesUpdated(
stream_idx, parameters.bitrate.GetTemporalLayerAllocation(stream_idx),
static_cast<int>(parameters.framerate_fps + 0.5));
}
UpdateVpxConfiguration(stream_idx);
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
vpx_codec_err_t err =
libvpx_->codec_enc_config_set(&encoders_[i], &vpx_configs_[i]);
if (err != VPX_CODEC_OK) {
RTC_LOG(LS_WARNING) << "Error configuring codec, error code: " << err
<< ", details: "
<< libvpx_->codec_error_detail(&encoders_[i]);
}
}
}
void LibvpxVp8Encoder::OnPacketLossRateUpdate(float packet_loss_rate) {
// TODO(bugs.webrtc.org/10431): Replace condition by DCHECK.
if (frame_buffer_controller_) {
frame_buffer_controller_->OnPacketLossRateUpdate(packet_loss_rate);
}
}
void LibvpxVp8Encoder::OnRttUpdate(int64_t rtt_ms) {
// TODO(bugs.webrtc.org/10431): Replace condition by DCHECK.
if (frame_buffer_controller_) {
frame_buffer_controller_->OnRttUpdate(rtt_ms);
}
}
void LibvpxVp8Encoder::OnLossNotification(
const LossNotification& loss_notification) {
if (frame_buffer_controller_) {
frame_buffer_controller_->OnLossNotification(loss_notification);
}
}
void LibvpxVp8Encoder::SetStreamState(bool send_stream, int stream_idx) {
if (send_stream && !send_stream_[stream_idx]) {
// Need a key frame if we have not sent this stream before.
key_frame_request_[stream_idx] = true;
}
send_stream_[stream_idx] = send_stream;
}
void LibvpxVp8Encoder::SetFecControllerOverride(
FecControllerOverride* fec_controller_override) {
// TODO(bugs.webrtc.org/10769): Update downstream and remove ability to
// pass nullptr.
// RTC_DCHECK(fec_controller_override);
RTC_DCHECK(!fec_controller_override_);
fec_controller_override_ = fec_controller_override;
}
// TODO(eladalon): s/inst/codec_settings/g.
int LibvpxVp8Encoder::InitEncode(const VideoCodec* inst,
const VideoEncoder::Settings& settings) {
if (inst == NULL) {
return WEBRTC_VIDEO_CODEC_ERR_PARAMETER;
}
if (inst->maxFramerate < 1) {
return WEBRTC_VIDEO_CODEC_ERR_PARAMETER;
}
// allow zero to represent an unspecified maxBitRate
if (inst->maxBitrate > 0 && inst->startBitrate > inst->maxBitrate) {
return WEBRTC_VIDEO_CODEC_ERR_PARAMETER;
}
if (inst->width < 1 || inst->height < 1) {
return WEBRTC_VIDEO_CODEC_ERR_PARAMETER;
}
if (settings.number_of_cores < 1) {
return WEBRTC_VIDEO_CODEC_ERR_PARAMETER;
}
num_active_streams_ = 0;
for (int i = 0; i < inst->numberOfSimulcastStreams; ++i) {
if (inst->simulcastStream[i].active) {
++num_active_streams_;
}
}
if (inst->numberOfSimulcastStreams == 0 && inst->active) {
num_active_streams_ = 1;
}
if (inst->VP8().automaticResizeOn && num_active_streams_ > 1) {
return WEBRTC_VIDEO_CODEC_ERR_PARAMETER;
}
// Use the previous pixel format to avoid extra image allocations.
vpx_img_fmt_t pixel_format =
raw_images_.empty() ? VPX_IMG_FMT_I420 : raw_images_[0].fmt;
int retVal = Release();
if (retVal < 0) {
return retVal;
}
int number_of_streams = SimulcastUtility::NumberOfSimulcastStreams(*inst);
if (number_of_streams > 1 &&
!SimulcastUtility::ValidSimulcastParameters(*inst, number_of_streams)) {
return WEBRTC_VIDEO_CODEC_ERR_SIMULCAST_PARAMETERS_NOT_SUPPORTED;
}
RTC_DCHECK(!frame_buffer_controller_);
if (frame_buffer_controller_factory_) {
frame_buffer_controller_ = frame_buffer_controller_factory_->Create(
*inst, settings, fec_controller_override_);
} else {
Vp8TemporalLayersFactory factory;
frame_buffer_controller_ =
factory.Create(*inst, settings, fec_controller_override_);
}
RTC_DCHECK(frame_buffer_controller_);
number_of_cores_ = settings.number_of_cores;
timestamp_ = 0;
codec_ = *inst;
// Code expects simulcastStream resolutions to be correct, make sure they are
// filled even when there are no simulcast layers.
if (codec_.numberOfSimulcastStreams == 0) {
codec_.simulcastStream[0].width = codec_.width;
codec_.simulcastStream[0].height = codec_.height;
}
encoded_images_.resize(number_of_streams);
encoders_.resize(number_of_streams);
vpx_configs_.resize(number_of_streams);
config_overrides_.resize(number_of_streams);
downsampling_factors_.resize(number_of_streams);
raw_images_.resize(number_of_streams);
send_stream_.resize(number_of_streams);
send_stream_[0] = true; // For non-simulcast case.
cpu_speed_.resize(number_of_streams);
std::fill(key_frame_request_.begin(), key_frame_request_.end(), false);
int idx = number_of_streams - 1;
for (int i = 0; i < (number_of_streams - 1); ++i, --idx) {
int gcd = GCD(inst->simulcastStream[idx].width,
inst->simulcastStream[idx - 1].width);
downsampling_factors_[i].num = inst->simulcastStream[idx].width / gcd;
downsampling_factors_[i].den = inst->simulcastStream[idx - 1].width / gcd;
send_stream_[i] = false;
}
if (number_of_streams > 1) {
send_stream_[number_of_streams - 1] = false;
downsampling_factors_[number_of_streams - 1].num = 1;
downsampling_factors_[number_of_streams - 1].den = 1;
}
// populate encoder configuration with default values
if (libvpx_->codec_enc_config_default(vpx_codec_vp8_cx(), &vpx_configs_[0],
0)) {
return WEBRTC_VIDEO_CODEC_ERROR;
}
// setting the time base of the codec
vpx_configs_[0].g_timebase.num = 1;
vpx_configs_[0].g_timebase.den = kRtpTicksPerSecond;
vpx_configs_[0].g_lag_in_frames = 0; // 0- no frame lagging
// Set the error resilience mode for temporal layers (but not simulcast).
vpx_configs_[0].g_error_resilient =
(SimulcastUtility::NumberOfTemporalLayers(*inst, 0) > 1)
? VPX_ERROR_RESILIENT_DEFAULT
: 0;
// Override the error resilience mode if this is not simulcast, but we are
// using temporal layers.
if (field_trial::IsEnabled(kVp8ForcePartitionResilience) &&
(number_of_streams == 1) &&
(SimulcastUtility::NumberOfTemporalLayers(*inst, 0) > 1)) {
RTC_LOG(LS_INFO) << "Overriding g_error_resilient from "
<< vpx_configs_[0].g_error_resilient << " to "
<< VPX_ERROR_RESILIENT_PARTITIONS;
vpx_configs_[0].g_error_resilient = VPX_ERROR_RESILIENT_PARTITIONS;
}
// rate control settings
vpx_configs_[0].rc_dropframe_thresh = FrameDropThreshold(0);
vpx_configs_[0].rc_end_usage = VPX_CBR;
vpx_configs_[0].g_pass = VPX_RC_ONE_PASS;
// Handle resizing outside of libvpx.
vpx_configs_[0].rc_resize_allowed = 0;
vpx_configs_[0].rc_min_quantizer =
codec_.mode == VideoCodecMode::kScreensharing ? 12 : 2;
if (inst->qpMax >= vpx_configs_[0].rc_min_quantizer) {
qp_max_ = inst->qpMax;
}
if (rate_control_settings_.LibvpxVp8QpMax()) {
qp_max_ = std::max(rate_control_settings_.LibvpxVp8QpMax().value(),
static_cast<int>(vpx_configs_[0].rc_min_quantizer));
}
vpx_configs_[0].rc_max_quantizer = qp_max_;
vpx_configs_[0].rc_undershoot_pct = 100;
vpx_configs_[0].rc_overshoot_pct = 15;
vpx_configs_[0].rc_buf_initial_sz = 500;
vpx_configs_[0].rc_buf_optimal_sz = 600;
vpx_configs_[0].rc_buf_sz = 1000;
// Set the maximum target size of any key-frame.
rc_max_intra_target_ = MaxIntraTarget(vpx_configs_[0].rc_buf_optimal_sz);
if (inst->VP8().keyFrameInterval > 0) {
vpx_configs_[0].kf_mode = VPX_KF_AUTO;
vpx_configs_[0].kf_max_dist = inst->VP8().keyFrameInterval;
} else {
vpx_configs_[0].kf_mode = VPX_KF_DISABLED;
}
// Allow the user to set the complexity for the base stream.
switch (inst->VP8().complexity) {
case VideoCodecComplexity::kComplexityHigh:
cpu_speed_[0] = -5;
break;
case VideoCodecComplexity::kComplexityHigher:
cpu_speed_[0] = -4;
break;
case VideoCodecComplexity::kComplexityMax:
cpu_speed_[0] = -3;
break;
default:
cpu_speed_[0] = -6;
break;
}
cpu_speed_default_ = cpu_speed_[0];
// Set encoding complexity (cpu_speed) based on resolution and/or platform.
cpu_speed_[0] = GetCpuSpeed(inst->width, inst->height);
for (int i = 1; i < number_of_streams; ++i) {
cpu_speed_[i] =
GetCpuSpeed(inst->simulcastStream[number_of_streams - 1 - i].width,
inst->simulcastStream[number_of_streams - 1 - i].height);
}
vpx_configs_[0].g_w = inst->width;
vpx_configs_[0].g_h = inst->height;
// Determine number of threads based on the image size and #cores.
// TODO(fbarchard): Consider number of Simulcast layers.
vpx_configs_[0].g_threads = NumberOfThreads(
vpx_configs_[0].g_w, vpx_configs_[0].g_h, settings.number_of_cores);
// Creating a wrapper to the image - setting image data to NULL.
// Actual pointer will be set in encode. Setting align to 1, as it
// is meaningless (no memory allocation is done here).
libvpx_->img_wrap(&raw_images_[0], pixel_format, inst->width, inst->height, 1,
NULL);
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
// Note the order we use is different from webm, we have lowest resolution
// at position 0 and they have highest resolution at position 0.
const size_t stream_idx_cfg_0 = encoders_.size() - 1;
SimulcastRateAllocator init_allocator(codec_);
VideoBitrateAllocation allocation =
init_allocator.Allocate(VideoBitrateAllocationParameters(
inst->startBitrate * 1000, inst->maxFramerate));
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
std::vector<uint32_t> stream_bitrates;
for (int i = 0; i == 0 || i < inst->numberOfSimulcastStreams; ++i) {
uint32_t bitrate = allocation.GetSpatialLayerSum(i) / 1000;
stream_bitrates.push_back(bitrate);
}
vpx_configs_[0].rc_target_bitrate = stream_bitrates[stream_idx_cfg_0];
if (stream_bitrates[stream_idx_cfg_0] > 0) {
uint32_t maxFramerate =
inst->simulcastStream[stream_idx_cfg_0].maxFramerate;
if (!maxFramerate) {
maxFramerate = inst->maxFramerate;
}
frame_buffer_controller_->OnRatesUpdated(
stream_idx_cfg_0,
allocation.GetTemporalLayerAllocation(stream_idx_cfg_0), maxFramerate);
}
frame_buffer_controller_->SetQpLimits(stream_idx_cfg_0,
vpx_configs_[0].rc_min_quantizer,
vpx_configs_[0].rc_max_quantizer);
UpdateVpxConfiguration(stream_idx_cfg_0);
vpx_configs_[0].rc_dropframe_thresh = FrameDropThreshold(stream_idx_cfg_0);
for (size_t i = 1; i < encoders_.size(); ++i) {
const size_t stream_idx = encoders_.size() - 1 - i;
memcpy(&vpx_configs_[i], &vpx_configs_[0], sizeof(vpx_configs_[0]));
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
vpx_configs_[i].g_w = inst->simulcastStream[stream_idx].width;
vpx_configs_[i].g_h = inst->simulcastStream[stream_idx].height;
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
// Use 1 thread for lower resolutions.
vpx_configs_[i].g_threads = 1;
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
vpx_configs_[i].rc_dropframe_thresh = FrameDropThreshold(stream_idx);
Reland #2 of Issue 2434073003: Extract bitrate allocation ... This is yet another reland of https://codereview.webrtc.org/2434073003/ including two fixes: 1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that. 2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams. Please review only the changes after patch set 1. Original description: Extract bitrate allocation of spatial/temporal layers out of codec impl. This CL makes a number of intervowen changes: * Add BitrateAllocation struct, that contains a codec independent view of how the target bitrate is distributed over spatial and temporal layers. * Adds the BitrateAllocator interface, which takes a bitrate and frame rate and produces a BitrateAllocation. * A default (non layered) implementation is added, and SimulcastRateAllocator is extended to fully handle VP8 allocation. This includes capturing TemporalLayer instances created by the encoder. * ViEEncoder now owns both the bitrate allocator and the temporal layer factories for VP8. This allows allocation to happen fully outside of the encoder implementation. This refactoring will make it possible for ViEEncoder to signal the full picture of target bitrates to the RTCP module. BUG=webrtc:6301 R=stefan@webrtc.org Review URL: https://codereview.webrtc.org/2510583002 . Cr-Commit-Position: refs/heads/master@{#15105}
2016-11-16 16:41:30 +01:00
// Setting alignment to 32 - as that ensures at least 16 for all
// planes (32 for Y, 16 for U,V). Libvpx sets the requested stride for
// the y plane, but only half of it to the u and v planes.
libvpx_->img_alloc(
&raw_images_[i], pixel_format, inst->simulcastStream[stream_idx].width,
inst->simulcastStream[stream_idx].height, kVp832ByteAlign);
SetStreamState(stream_bitrates[stream_idx] > 0, stream_idx);
vpx_configs_[i].rc_target_bitrate = stream_bitrates[stream_idx];
if (stream_bitrates[stream_idx] > 0) {
uint32_t maxFramerate = inst->simulcastStream[stream_idx].maxFramerate;
if (!maxFramerate) {
maxFramerate = inst->maxFramerate;
}
frame_buffer_controller_->OnRatesUpdated(
stream_idx, allocation.GetTemporalLayerAllocation(stream_idx),
maxFramerate);
}
frame_buffer_controller_->SetQpLimits(stream_idx,
vpx_configs_[i].rc_min_quantizer,
vpx_configs_[i].rc_max_quantizer);
UpdateVpxConfiguration(stream_idx);
}
return InitAndSetControlSettings();
}
int LibvpxVp8Encoder::GetCpuSpeed(int width, int height) {
#if defined(WEBRTC_ARCH_ARM) || defined(WEBRTC_ARCH_ARM64) || \
defined(WEBRTC_ANDROID)
// On mobile platform, use a lower speed setting for lower resolutions for
// CPUs with 4 or more cores.
RTC_DCHECK_GT(number_of_cores_, 0);
if (experimental_cpu_speed_config_arm_
.GetValue(width * height, number_of_cores_)
.has_value()) {
return experimental_cpu_speed_config_arm_
.GetValue(width * height, number_of_cores_)
.value();
}
if (number_of_cores_ <= 3)
return -12;
if (width * height <= 352 * 288)
return -8;
else if (width * height <= 640 * 480)
return -10;
else
return -12;
#else
// For non-ARM, increase encoding complexity (i.e., use lower speed setting)
// if resolution is below CIF. Otherwise, keep the default/user setting
// (|cpu_speed_default_|) set on InitEncode via VP8().complexity.
if (width * height < 352 * 288)
return (cpu_speed_default_ < -4) ? -4 : cpu_speed_default_;
else
return cpu_speed_default_;
#endif
}
int LibvpxVp8Encoder::NumberOfThreads(int width, int height, int cpus) {
#if defined(WEBRTC_ANDROID)
if (width * height >= 320 * 180) {
if (cpus >= 4) {
// 3 threads for CPUs with 4 and more cores since most of times only 4
// cores will be active.
return 3;
} else if (cpus == 3 || cpus == 2) {
return 2;
} else {
return 1;
}
}
return 1;
#else
#if defined(WEBRTC_IOS)
std::string trial_string =
field_trial::FindFullName(kVP8IosMaxNumberOfThreadFieldTrial);
FieldTrialParameter<int> max_thread_number(
kVP8IosMaxNumberOfThreadFieldTrialParameter, 0);
ParseFieldTrial({&max_thread_number}, trial_string);
if (max_thread_number.Get() > 0) {
if (width * height < 320 * 180) {
return 1; // Use single thread for small screens
}
// thread number must be less than or equal to the number of CPUs.
return std::min(cpus, max_thread_number.Get());
}
#endif // defined(WEBRTC_IOS)
if (width * height >= 1920 * 1080 && cpus > 8) {
return 8; // 8 threads for 1080p on high perf machines.
} else if (width * height > 1280 * 960 && cpus >= 6) {
// 3 threads for 1080p.
return 3;
} else if (width * height > 640 * 480 && cpus >= 3) {
// Default 2 threads for qHD/HD, but allow 3 if core count is high enough,
// as this will allow more margin for high-core/low clock machines or if
// not built with highest optimization.
if (cpus >= 6) {
return 3;
}
return 2;
} else {
// 1 thread for VGA or less.
return 1;
}
#endif
}
int LibvpxVp8Encoder::InitAndSetControlSettings() {
vpx_codec_flags_t flags = 0;
flags |= VPX_CODEC_USE_OUTPUT_PARTITION;
if (encoders_.size() > 1) {
int error = libvpx_->codec_enc_init_multi(
&encoders_[0], vpx_codec_vp8_cx(), &vpx_configs_[0], encoders_.size(),
flags, &downsampling_factors_[0]);
if (error) {
return WEBRTC_VIDEO_CODEC_UNINITIALIZED;
}
} else {
if (libvpx_->codec_enc_init(&encoders_[0], vpx_codec_vp8_cx(),
&vpx_configs_[0], flags)) {
return WEBRTC_VIDEO_CODEC_UNINITIALIZED;
}
}
// Enable denoising for the highest resolution stream, and for
// the second highest resolution if we are doing more than 2
// spatial layers/streams.
// TODO(holmer): Investigate possibility of adding a libvpx API
// for getting the denoised frame from the encoder and using that
// when encoding lower resolution streams. Would it work with the
// multi-res encoding feature?
denoiserState denoiser_state = kDenoiserOnYOnly;
#if defined(WEBRTC_ARCH_ARM) || defined(WEBRTC_ARCH_ARM64) || \
defined(WEBRTC_ANDROID)
denoiser_state = kDenoiserOnYOnly;
#else
denoiser_state = kDenoiserOnAdaptive;
#endif
libvpx_->codec_control(
&encoders_[0], VP8E_SET_NOISE_SENSITIVITY,
codec_.VP8()->denoisingOn ? denoiser_state : kDenoiserOff);
if (encoders_.size() > 2) {
libvpx_->codec_control(
&encoders_[1], VP8E_SET_NOISE_SENSITIVITY,
codec_.VP8()->denoisingOn ? denoiser_state : kDenoiserOff);
}
for (size_t i = 0; i < encoders_.size(); ++i) {
// Allow more screen content to be detected as static.
libvpx_->codec_control(
&(encoders_[i]), VP8E_SET_STATIC_THRESHOLD,
codec_.mode == VideoCodecMode::kScreensharing ? 100u : 1u);
libvpx_->codec_control(&(encoders_[i]), VP8E_SET_CPUUSED, cpu_speed_[i]);
libvpx_->codec_control(
&(encoders_[i]), VP8E_SET_TOKEN_PARTITIONS,
static_cast<vp8e_token_partitions>(kTokenPartitions));
libvpx_->codec_control(&(encoders_[i]), VP8E_SET_MAX_INTRA_BITRATE_PCT,
rc_max_intra_target_);
// VP8E_SET_SCREEN_CONTENT_MODE 2 = screen content with more aggressive
// rate control (drop frames on large target bitrate overshoot)
libvpx_->codec_control(
&(encoders_[i]), VP8E_SET_SCREEN_CONTENT_MODE,
codec_.mode == VideoCodecMode::kScreensharing ? 2u : 0u);
}
inited_ = true;
return WEBRTC_VIDEO_CODEC_OK;
}
uint32_t LibvpxVp8Encoder::MaxIntraTarget(uint32_t optimalBuffersize) {
// Set max to the optimal buffer level (normalized by target BR),
// and scaled by a scalePar.
// Max target size = scalePar * optimalBufferSize * targetBR[Kbps].
// This values is presented in percentage of perFrameBw:
// perFrameBw = targetBR[Kbps] * 1000 / frameRate.
// The target in % is as follows:
float scalePar = 0.5;
uint32_t targetPct = optimalBuffersize * scalePar * codec_.maxFramerate / 10;
// Don't go below 3 times the per frame bandwidth.
const uint32_t minIntraTh = 300;
return (targetPct < minIntraTh) ? minIntraTh : targetPct;
}
uint32_t LibvpxVp8Encoder::FrameDropThreshold(size_t spatial_idx) const {
bool enable_frame_dropping = codec_.VP8().frameDroppingOn;
// If temporal layers are used, they get to override the frame dropping
// setting, as eg. ScreenshareLayers does not work as intended with frame
// dropping on and DefaultTemporalLayers will have performance issues with
// frame dropping off.
RTC_DCHECK(frame_buffer_controller_);
RTC_DCHECK_LT(spatial_idx, frame_buffer_controller_->StreamCount());
enable_frame_dropping =
frame_buffer_controller_->SupportsEncoderFrameDropping(spatial_idx);
return enable_frame_dropping ? 30 : 0;
}
size_t LibvpxVp8Encoder::SteadyStateSize(int sid, int tid) {
const int encoder_id = encoders_.size() - 1 - sid;
size_t bitrate_bps;
float fps;
if ((SimulcastUtility::IsConferenceModeScreenshare(codec_) && sid == 0) ||
vpx_configs_[encoder_id].ts_number_layers <= 1) {
// In conference screenshare there's no defined per temporal layer bitrate
// and framerate.
bitrate_bps = vpx_configs_[encoder_id].rc_target_bitrate * 1000;
fps = codec_.maxFramerate;
} else {
bitrate_bps = vpx_configs_[encoder_id].ts_target_bitrate[tid] * 1000;
fps = codec_.maxFramerate /
fmax(vpx_configs_[encoder_id].ts_rate_decimator[tid], 1.0);
if (tid > 0) {
// Layer bitrate and fps are counted as a partial sums.
bitrate_bps -= vpx_configs_[encoder_id].ts_target_bitrate[tid - 1] * 1000;
fps = codec_.maxFramerate /
fmax(vpx_configs_[encoder_id].ts_rate_decimator[tid - 1], 1.0);
}
}
if (fps < 1e-9)
return 0;
return static_cast<size_t>(
bitrate_bps / (8 * fps) *
(100 -
variable_framerate_experiment_.steady_state_undershoot_percentage) /
100 +
0.5);
}
bool LibvpxVp8Encoder::UpdateVpxConfiguration(size_t stream_index) {
RTC_DCHECK(frame_buffer_controller_);
const size_t config_index = vpx_configs_.size() - 1 - stream_index;
RTC_DCHECK_LT(config_index, config_overrides_.size());
Vp8EncoderConfig* config = &config_overrides_[config_index];
const Vp8EncoderConfig new_config =
frame_buffer_controller_->UpdateConfiguration(stream_index);
if (new_config.reset_previous_configuration_overrides) {
*config = new_config;
return true;
}
const bool changes_made = MaybeExtendVp8EncoderConfig(new_config, config);
// Note that overrides must be applied even if they haven't changed.
RTC_DCHECK_LT(config_index, vpx_configs_.size());
vpx_codec_enc_cfg_t* vpx_config = &vpx_configs_[config_index];
ApplyVp8EncoderConfigToVpxConfig(*config, vpx_config);
return changes_made;
}
int LibvpxVp8Encoder::Encode(const VideoFrame& frame,
const std::vector<VideoFrameType>* frame_types) {
RTC_DCHECK_EQ(frame.width(), codec_.width);
RTC_DCHECK_EQ(frame.height(), codec_.height);
if (!inited_)
return WEBRTC_VIDEO_CODEC_UNINITIALIZED;
if (encoded_complete_callback_ == NULL)
return WEBRTC_VIDEO_CODEC_UNINITIALIZED;
bool key_frame_requested = false;
for (size_t i = 0; i < key_frame_request_.size() && i < send_stream_.size();
++i) {
if (key_frame_request_[i] && send_stream_[i]) {
key_frame_requested = true;
break;
}
}
if (!key_frame_requested && frame_types) {
for (size_t i = 0; i < frame_types->size() && i < send_stream_.size();
++i) {
if ((*frame_types)[i] == VideoFrameType::kVideoFrameKey &&
send_stream_[i]) {
key_frame_requested = true;
break;
}
}
}
if (frame.update_rect().IsEmpty() && num_steady_state_frames_ >= 3 &&
!key_frame_requested) {
if (variable_framerate_experiment_.enabled &&
framerate_controller_.DropFrame(frame.timestamp() / kRtpTicksPerMs)) {
return WEBRTC_VIDEO_CODEC_OK;
}
framerate_controller_.AddFrame(frame.timestamp() / kRtpTicksPerMs);
}
bool send_key_frame = key_frame_requested;
bool drop_frame = false;
bool retransmission_allowed = true;
Vp8FrameConfig tl_configs[kMaxSimulcastStreams];
for (size_t i = 0; i < encoders_.size(); ++i) {
tl_configs[i] =
frame_buffer_controller_->NextFrameConfig(i, frame.timestamp());
send_key_frame |= tl_configs[i].IntraFrame();
drop_frame |= tl_configs[i].drop_frame;
RTC_DCHECK(i == 0 ||
retransmission_allowed == tl_configs[i].retransmission_allowed);
retransmission_allowed = tl_configs[i].retransmission_allowed;
}
if (drop_frame && !send_key_frame) {
return WEBRTC_VIDEO_CODEC_OK;
}
vpx_enc_frame_flags_t flags[kMaxSimulcastStreams];
for (size_t i = 0; i < encoders_.size(); ++i) {
flags[i] = send_key_frame ? VPX_EFLAG_FORCE_KF : EncodeFlags(tl_configs[i]);
}
rtc::scoped_refptr<VideoFrameBuffer> input_image = frame.video_frame_buffer();
Revert "NV12 support for VP8 simulcast" This reverts commit 76d3e7a8d1539483a8465d6502cc8259e74ccebf. Reason for revert: Causes multiple Chromium WPT tests to crash, preventing rolls. Sample failed run: https://ci.chromium.org/p/chromium/builders/try/win10_chromium_x64_rel_ng/685757? Sample stack trace: #0 0x7ff8623fbde9 base::debug::CollectStackTrace() STDERR: #1 0x7ff862311ca3 [2665012:17:1009/162250.249660:WARNING:timestamp_aligner.cc(131)] too short translated timestamp interval: system time (us) = 3042652370324, interval (us) = 834 STDERR: base::debug::StackTrace::StackTrace() STDERR: #2 0x7ff8623fb93b base::debug::(anonymous namespace)::StackDumpSignalHandler() STDERR: #3 0x7ff857a70140 [2665012:17:1009/162250.249947:WARNING:timestamp_aligner.cc(131)] too short translated timestamp interval: system time (us) = 3042652370634, interval (us) = 742 STDERR: (/lib/x86_64-linux-gnu/libpthread-2.31.so+0x1413f) STDERR: #4 0x7ff85778edb1 gsignal STDERR: #5 0x7ff857778537 abort STDERR: #6 0x7ff855d5eee2 [2665012:17:1009/162250.250342:WARNING:timestamp_aligner.cc(131)] too short translated timestamp interval: system time (us) = 3042652371030, interval (us) = 706 STDERR: [2665012:17:1009/162250.250514:WARNING:timestamp_aligner.cc(131)] too short translated timestamp interval: system time (us) = 3042652371204, interval (us) = 963 STDERR: rtc::webrtc_checks_impl::FatalLog() STDERR: #7 0x7ff855f14e62 webrtc::LibvpxVp8Encoder::PrepareRawImagesForEncoding() STDERR: #8 0x7ff855f14412 webrtc::LibvpxVp8Encoder::Encode() STDERR: #9 0x7ff855bae765 webrtc::SimulcastEncoderAdapter::Encode() STDERR: #10 0x7ff85607d598 webrtc::VideoStreamEncoder::EncodeVideoFrame() STDERR: #11 0x7ff85607c60d webrtc::VideoStreamEncoder::MaybeEncodeVideoFrame() STDERR: #12 0x7ff8560816f5 webrtc::webrtc_new_closure_impl::ClosureTask<>::Run() STDERR: #13 0x7ff855b352b5 (anonymous namespace)::WebrtcTaskQueue::RunTask() STDERR: #14 0x7ff855b3531e base::internal::Invoker<>::RunOnce() STDERR: #15 0x7ff86239785b base::TaskAnnotator::RunTask() STDERR: #16 0x7ff8623c8557 base::internal::TaskTracker::RunSkipOnShutdown() STDERR: #17 0x7ff8623c7d92 base::internal::TaskTracker::RunTask() STDERR: #18 0x7ff862415a06 base::internal::TaskTrackerPosix::RunTask() STDERR: #19 0x7ff8623c75e6 base::internal::TaskTracker::RunAndPopNextTask() STDERR: #20 0x7ff8623d3a8d base::internal::WorkerThread::RunWorker() STDERR: #21 0x7ff8623d368d base::internal::WorkerThread::RunPooledWorker() STDERR: #22 0x7ff862416509 base::(anonymous namespace)::ThreadFunc() STDERR: #23 0x7ff857a64ea7 start_thread Original change's description: > NV12 support for VP8 simulcast > > Tested using video_loopback with generated NV12 frames. > > Bug: webrtc:11635, webrtc:11975 > Change-Id: I14b2d663c55a83d80e48e226fcf706cb18903193 > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/186722 > Commit-Queue: Evan Shrubsole <eshr@google.com> > Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org> > Cr-Commit-Position: refs/heads/master@{#32325} TBR=ilnik@webrtc.org,eshr@google.com # Not skipping CQ checks because original CL landed > 1 day ago. Bug: webrtc:11635 Bug: webrtc:11975 Change-Id: I61c8aed1270bc9c2f7f0577fa5ca717a325f548a Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/187484 Reviewed-by: Guido Urdaneta <guidou@webrtc.org> Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org> Commit-Queue: Guido Urdaneta <guidou@webrtc.org> Cr-Commit-Position: refs/heads/master@{#32369}
2020-10-09 14:26:56 +00:00
// Since we are extracting raw pointers from |input_image| to
// |raw_images_[0]|, the resolution of these frames must match.
RTC_DCHECK_EQ(input_image->width(), raw_images_[0].d_w);
RTC_DCHECK_EQ(input_image->height(), raw_images_[0].d_h);
switch (input_image->type()) {
case VideoFrameBuffer::Type::kI420:
PrepareI420Image(input_image->GetI420());
break;
case VideoFrameBuffer::Type::kNV12:
PrepareNV12Image(input_image->GetNV12());
break;
default: {
rtc::scoped_refptr<I420BufferInterface> i420_image =
input_image->ToI420();
if (!i420_image) {
RTC_LOG(LS_ERROR) << "Failed to convert "
<< VideoFrameBufferTypeToString(input_image->type())
<< " image to I420. Can't encode frame.";
return WEBRTC_VIDEO_CODEC_ERROR;
}
input_image = i420_image;
PrepareI420Image(i420_image);
}
}
struct CleanUpOnExit {
explicit CleanUpOnExit(vpx_image_t& raw_image) : raw_image_(raw_image) {}
~CleanUpOnExit() {
raw_image_.planes[VPX_PLANE_Y] = nullptr;
raw_image_.planes[VPX_PLANE_U] = nullptr;
raw_image_.planes[VPX_PLANE_V] = nullptr;
}
vpx_image_t& raw_image_;
} clean_up_on_exit(raw_images_[0]);
if (send_key_frame) {
// Adapt the size of the key frame when in screenshare with 1 temporal
// layer.
if (encoders_.size() == 1 &&
codec_.mode == VideoCodecMode::kScreensharing &&
codec_.VP8()->numberOfTemporalLayers <= 1) {
const uint32_t forceKeyFrameIntraTh = 100;
libvpx_->codec_control(&(encoders_[0]), VP8E_SET_MAX_INTRA_BITRATE_PCT,
forceKeyFrameIntraTh);
}
std::fill(key_frame_request_.begin(), key_frame_request_.end(), false);
}
// Set the encoder frame flags and temporal layer_id for each spatial stream.
// Note that streams are defined starting from lowest resolution at
// position 0 to highest resolution at position |encoders_.size() - 1|,
// whereas |encoder_| is from highest to lowest resolution.
for (size_t i = 0; i < encoders_.size(); ++i) {
const size_t stream_idx = encoders_.size() - 1 - i;
if (UpdateVpxConfiguration(stream_idx)) {
if (libvpx_->codec_enc_config_set(&encoders_[i], &vpx_configs_[i]))
return WEBRTC_VIDEO_CODEC_ERROR;
}
libvpx_->codec_control(&encoders_[i], VP8E_SET_FRAME_FLAGS,
static_cast<int>(flags[stream_idx]));
libvpx_->codec_control(&encoders_[i], VP8E_SET_TEMPORAL_LAYER_ID,
tl_configs[i].encoder_layer_id);
}
// TODO(holmer): Ideally the duration should be the timestamp diff of this
// frame and the next frame to be encoded, which we don't have. Instead we
// would like to use the duration of the previous frame. Unfortunately the
// rate control seems to be off with that setup. Using the average input
// frame rate to calculate an average duration for now.
assert(codec_.maxFramerate > 0);
uint32_t duration = kRtpTicksPerSecond / codec_.maxFramerate;
int error = WEBRTC_VIDEO_CODEC_OK;
int num_tries = 0;
// If the first try returns WEBRTC_VIDEO_CODEC_TARGET_BITRATE_OVERSHOOT
// the frame must be reencoded with the same parameters again because
// target bitrate is exceeded and encoder state has been reset.
while (num_tries == 0 ||
(num_tries == 1 &&
error == WEBRTC_VIDEO_CODEC_TARGET_BITRATE_OVERSHOOT)) {
++num_tries;
// Note we must pass 0 for |flags| field in encode call below since they are
// set above in |libvpx_interface_->vpx_codec_control_| function for each
// encoder/spatial layer.
error = libvpx_->codec_encode(&encoders_[0], &raw_images_[0], timestamp_,
duration, 0, VPX_DL_REALTIME);
// Reset specific intra frame thresholds, following the key frame.
if (send_key_frame) {
libvpx_->codec_control(&(encoders_[0]), VP8E_SET_MAX_INTRA_BITRATE_PCT,
rc_max_intra_target_);
}
if (error)
return WEBRTC_VIDEO_CODEC_ERROR;
// Examines frame timestamps only.
error = GetEncodedPartitions(frame, retransmission_allowed);
}
// TODO(sprang): Shouldn't we use the frame timestamp instead?
timestamp_ += duration;
return error;
}
void LibvpxVp8Encoder::PopulateCodecSpecific(CodecSpecificInfo* codec_specific,
const vpx_codec_cx_pkt_t& pkt,
int stream_idx,
int encoder_idx,
uint32_t timestamp) {
assert(codec_specific != NULL);
codec_specific->codecType = kVideoCodecVP8;
codec_specific->codecSpecific.VP8.keyIdx =
kNoKeyIdx; // TODO(hlundin) populate this
codec_specific->codecSpecific.VP8.nonReference =
(pkt.data.frame.flags & VPX_FRAME_IS_DROPPABLE) != 0;
int qp = 0;
vpx_codec_control(&encoders_[encoder_idx], VP8E_GET_LAST_QUANTIZER_64, &qp);
bool is_keyframe = (pkt.data.frame.flags & VPX_FRAME_IS_KEY) != 0;
frame_buffer_controller_->OnEncodeDone(stream_idx, timestamp,
encoded_images_[encoder_idx].size(),
is_keyframe, qp, codec_specific);
if (is_keyframe && codec_specific->template_structure != absl::nullopt) {
// Number of resolutions must match number of spatial layers, VP8 structures
// expected to use single spatial layer. Templates must be ordered by
// spatial_id, so assumption there is exactly one spatial layer is same as
// assumption last template uses spatial_id = 0.
// This check catches potential scenario where template_structure is shared
// across multiple vp8 streams and they are distinguished using spatial_id.
// Assigning single resolution doesn't support such scenario, i.e. assumes
// vp8 simulcast is sent using multiple ssrcs.
RTC_DCHECK(!codec_specific->template_structure->templates.empty());
RTC_DCHECK_EQ(
codec_specific->template_structure->templates.back().spatial_id, 0);
codec_specific->template_structure->resolutions = {
RenderResolution(pkt.data.frame.width[0], pkt.data.frame.height[0])};
}
}
int LibvpxVp8Encoder::GetEncodedPartitions(const VideoFrame& input_image,
bool retransmission_allowed) {
int stream_idx = static_cast<int>(encoders_.size()) - 1;
int result = WEBRTC_VIDEO_CODEC_OK;
for (size_t encoder_idx = 0; encoder_idx < encoders_.size();
++encoder_idx, --stream_idx) {
vpx_codec_iter_t iter = NULL;
encoded_images_[encoder_idx].set_size(0);
encoded_images_[encoder_idx]._frameType = VideoFrameType::kVideoFrameDelta;
CodecSpecificInfo codec_specific;
const vpx_codec_cx_pkt_t* pkt = NULL;
size_t encoded_size = 0;
while ((pkt = libvpx_->codec_get_cx_data(&encoders_[encoder_idx], &iter)) !=
NULL) {
if (pkt->kind == VPX_CODEC_CX_FRAME_PKT) {
encoded_size += pkt->data.frame.sz;
}
}
// TODO(nisse): Introduce some buffer cache or buffer pool, to reduce
// allocations and/or copy operations.
auto buffer = EncodedImageBuffer::Create(encoded_size);
iter = NULL;
size_t encoded_pos = 0;
while ((pkt = libvpx_->codec_get_cx_data(&encoders_[encoder_idx], &iter)) !=
NULL) {
switch (pkt->kind) {
case VPX_CODEC_CX_FRAME_PKT: {
RTC_CHECK_LE(encoded_pos + pkt->data.frame.sz, buffer->size());
memcpy(&buffer->data()[encoded_pos], pkt->data.frame.buf,
pkt->data.frame.sz);
encoded_pos += pkt->data.frame.sz;
break;
}
default:
break;
}
// End of frame
if ((pkt->data.frame.flags & VPX_FRAME_IS_FRAGMENT) == 0) {
// check if encoded frame is a key frame
if (pkt->data.frame.flags & VPX_FRAME_IS_KEY) {
encoded_images_[encoder_idx]._frameType =
VideoFrameType::kVideoFrameKey;
}
encoded_images_[encoder_idx].SetEncodedData(buffer);
encoded_images_[encoder_idx].set_size(encoded_pos);
encoded_images_[encoder_idx].SetSpatialIndex(stream_idx);
PopulateCodecSpecific(&codec_specific, *pkt, stream_idx, encoder_idx,
input_image.timestamp());
break;
}
}
encoded_images_[encoder_idx].SetTimestamp(input_image.timestamp());
encoded_images_[encoder_idx].SetRetransmissionAllowed(
retransmission_allowed);
if (send_stream_[stream_idx]) {
if (encoded_images_[encoder_idx].size() > 0) {
TRACE_COUNTER_ID1("webrtc", "EncodedFrameSize", encoder_idx,
encoded_images_[encoder_idx].size());
encoded_images_[encoder_idx]._encodedHeight =
codec_.simulcastStream[stream_idx].height;
encoded_images_[encoder_idx]._encodedWidth =
codec_.simulcastStream[stream_idx].width;
int qp_128 = -1;
libvpx_->codec_control(&encoders_[encoder_idx], VP8E_GET_LAST_QUANTIZER,
&qp_128);
encoded_images_[encoder_idx].qp_ = qp_128;
encoded_complete_callback_->OnEncodedImage(encoded_images_[encoder_idx],
&codec_specific);
const size_t steady_state_size = SteadyStateSize(
stream_idx, codec_specific.codecSpecific.VP8.temporalIdx);
if (qp_128 > variable_framerate_experiment_.steady_state_qp ||
encoded_images_[encoder_idx].size() > steady_state_size) {
num_steady_state_frames_ = 0;
} else {
++num_steady_state_frames_;
}
} else if (!frame_buffer_controller_->SupportsEncoderFrameDropping(
stream_idx)) {
result = WEBRTC_VIDEO_CODEC_TARGET_BITRATE_OVERSHOOT;
if (encoded_images_[encoder_idx].size() == 0) {
// Dropped frame that will be re-encoded.
frame_buffer_controller_->OnFrameDropped(stream_idx,
input_image.timestamp());
}
}
}
}
return result;
}
VideoEncoder::EncoderInfo LibvpxVp8Encoder::GetEncoderInfo() const {
EncoderInfo info;
info.supports_native_handle = false;
info.implementation_name = "libvpx";
info.has_trusted_rate_controller =
rate_control_settings_.LibvpxVp8TrustedRateController();
info.is_hardware_accelerated = false;
info.has_internal_source = false;
info.supports_simulcast = true;
if (!resolution_bitrate_limits_.empty()) {
info.resolution_bitrate_limits = resolution_bitrate_limits_;
}
if (requested_resolution_alignment_override_) {
info.requested_resolution_alignment =
*requested_resolution_alignment_override_;
}
const bool enable_scaling =
num_active_streams_ == 1 &&
(vpx_configs_.empty() || vpx_configs_[0].rc_dropframe_thresh > 0) &&
codec_.VP8().automaticResizeOn;
info.scaling_settings = enable_scaling
? VideoEncoder::ScalingSettings(
kLowVp8QpThreshold, kHighVp8QpThreshold)
: VideoEncoder::ScalingSettings::kOff;
if (rate_control_settings_.LibvpxVp8MinPixels()) {
info.scaling_settings.min_pixels_per_frame =
rate_control_settings_.LibvpxVp8MinPixels().value();
}
info.preferred_pixel_formats = {VideoFrameBuffer::Type::kI420,
VideoFrameBuffer::Type::kNV12};
if (inited_) {
// |encoder_idx| is libvpx index where 0 is highest resolution.
// |si| is simulcast index, where 0 is lowest resolution.
for (size_t si = 0, encoder_idx = encoders_.size() - 1;
si < encoders_.size(); ++si, --encoder_idx) {
info.fps_allocation[si].clear();
if ((codec_.numberOfSimulcastStreams > si &&
!codec_.simulcastStream[si].active) ||
(si == 0 && SimulcastUtility::IsConferenceModeScreenshare(codec_))) {
// No defined frame rate fractions if not active or if using
// ScreenshareLayers, leave vector empty and continue;
continue;
}
if (vpx_configs_[encoder_idx].ts_number_layers <= 1) {
info.fps_allocation[si].push_back(EncoderInfo::kMaxFramerateFraction);
} else {
for (size_t ti = 0; ti < vpx_configs_[encoder_idx].ts_number_layers;
++ti) {
RTC_DCHECK_GT(vpx_configs_[encoder_idx].ts_rate_decimator[ti], 0);
info.fps_allocation[si].push_back(rtc::saturated_cast<uint8_t>(
EncoderInfo::kMaxFramerateFraction /
vpx_configs_[encoder_idx].ts_rate_decimator[ti] +
0.5));
}
}
}
}
return info;
}
int LibvpxVp8Encoder::RegisterEncodeCompleteCallback(
EncodedImageCallback* callback) {
encoded_complete_callback_ = callback;
return WEBRTC_VIDEO_CODEC_OK;
}
void LibvpxVp8Encoder::MaybeUpdatePixelFormat(vpx_img_fmt fmt) {
RTC_DCHECK(!raw_images_.empty());
if (raw_images_[0].fmt == fmt) {
RTC_DCHECK(std::all_of(
std::next(raw_images_.begin()), raw_images_.end(),
[fmt](const vpx_image_t& raw_img) { return raw_img.fmt == fmt; }))
<< "Not all raw images had the right format!";
return;
}
RTC_LOG(INFO) << "Updating vp8 encoder pixel format to "
<< (fmt == VPX_IMG_FMT_NV12 ? "NV12" : "I420");
for (size_t i = 0; i < raw_images_.size(); ++i) {
vpx_image_t& img = raw_images_[i];
auto d_w = img.d_w;
auto d_h = img.d_h;
libvpx_->img_free(&img);
// First image is wrapping the input frame, the rest are allocated.
if (i == 0) {
libvpx_->img_wrap(&img, fmt, d_w, d_h, 1, NULL);
} else {
libvpx_->img_alloc(&img, fmt, d_w, d_h, kVp832ByteAlign);
}
}
}
void LibvpxVp8Encoder::PrepareI420Image(const I420BufferInterface* frame) {
RTC_DCHECK(!raw_images_.empty());
MaybeUpdatePixelFormat(VPX_IMG_FMT_I420);
// Image in vpx_image_t format.
// Input image is const. VP8's raw image is not defined as const.
raw_images_[0].planes[VPX_PLANE_Y] = const_cast<uint8_t*>(frame->DataY());
raw_images_[0].planes[VPX_PLANE_U] = const_cast<uint8_t*>(frame->DataU());
raw_images_[0].planes[VPX_PLANE_V] = const_cast<uint8_t*>(frame->DataV());
raw_images_[0].stride[VPX_PLANE_Y] = frame->StrideY();
raw_images_[0].stride[VPX_PLANE_U] = frame->StrideU();
raw_images_[0].stride[VPX_PLANE_V] = frame->StrideV();
for (size_t i = 1; i < encoders_.size(); ++i) {
// Scale the image down a number of times by downsampling factor
libyuv::I420Scale(
raw_images_[i - 1].planes[VPX_PLANE_Y],
raw_images_[i - 1].stride[VPX_PLANE_Y],
raw_images_[i - 1].planes[VPX_PLANE_U],
raw_images_[i - 1].stride[VPX_PLANE_U],
raw_images_[i - 1].planes[VPX_PLANE_V],
raw_images_[i - 1].stride[VPX_PLANE_V], raw_images_[i - 1].d_w,
raw_images_[i - 1].d_h, raw_images_[i].planes[VPX_PLANE_Y],
raw_images_[i].stride[VPX_PLANE_Y], raw_images_[i].planes[VPX_PLANE_U],
raw_images_[i].stride[VPX_PLANE_U], raw_images_[i].planes[VPX_PLANE_V],
raw_images_[i].stride[VPX_PLANE_V], raw_images_[i].d_w,
raw_images_[i].d_h, libyuv::kFilterBilinear);
}
}
void LibvpxVp8Encoder::PrepareNV12Image(const NV12BufferInterface* frame) {
RTC_DCHECK(!raw_images_.empty());
MaybeUpdatePixelFormat(VPX_IMG_FMT_NV12);
// Image in vpx_image_t format.
// Input image is const. VP8's raw image is not defined as const.
raw_images_[0].planes[VPX_PLANE_Y] = const_cast<uint8_t*>(frame->DataY());
raw_images_[0].planes[VPX_PLANE_U] = const_cast<uint8_t*>(frame->DataUV());
raw_images_[0].planes[VPX_PLANE_V] = raw_images_[0].planes[VPX_PLANE_U] + 1;
raw_images_[0].stride[VPX_PLANE_Y] = frame->StrideY();
raw_images_[0].stride[VPX_PLANE_U] = frame->StrideUV();
raw_images_[0].stride[VPX_PLANE_V] = frame->StrideUV();
for (size_t i = 1; i < encoders_.size(); ++i) {
// Scale the image down a number of times by downsampling factor
libyuv::NV12Scale(
raw_images_[i - 1].planes[VPX_PLANE_Y],
raw_images_[i - 1].stride[VPX_PLANE_Y],
raw_images_[i - 1].planes[VPX_PLANE_U],
raw_images_[i - 1].stride[VPX_PLANE_U], raw_images_[i - 1].d_w,
raw_images_[i - 1].d_h, raw_images_[i].planes[VPX_PLANE_Y],
raw_images_[i].stride[VPX_PLANE_Y], raw_images_[i].planes[VPX_PLANE_U],
raw_images_[i].stride[VPX_PLANE_U], raw_images_[i].d_w,
raw_images_[i].d_h, libyuv::kFilterBilinear);
raw_images_[i].planes[VPX_PLANE_V] = raw_images_[i].planes[VPX_PLANE_U] + 1;
}
}
// static
LibvpxVp8Encoder::VariableFramerateExperiment
LibvpxVp8Encoder::ParseVariableFramerateConfig(std::string group_name) {
FieldTrialFlag disabled = FieldTrialFlag("Disabled");
FieldTrialParameter<double> framerate_limit("min_fps", 5.0);
FieldTrialParameter<int> qp("min_qp", 15);
FieldTrialParameter<int> undershoot_percentage("undershoot", 30);
ParseFieldTrial({&disabled, &framerate_limit, &qp, &undershoot_percentage},
field_trial::FindFullName(group_name));
VariableFramerateExperiment config;
config.enabled = !disabled.Get();
config.framerate_limit = framerate_limit.Get();
config.steady_state_qp = qp.Get();
config.steady_state_undershoot_percentage = undershoot_percentage.Get();
return config;
}
} // namespace webrtc