This lets the RTP code be unaware of lower layers, and the
SetTransportOverhead method is deleted from RTPSender and RtpRtcp.
Instead, that method is added to CongestionController and
TransportFeedbackAdapter, where it is more appropriate.
BUG=wertc:6847
Review-Url: https://codereview.webrtc.org/2589743002
Cr-Commit-Position: refs/heads/master@{#15995}
The packet size was only used to control how often to output DTMF
packets. However, it likely did not work as intended, since that
interval was only set during initialization. No changes to the packet
size, like what AudioEncoder::Num10MsFramesInNextPacket could
indicate, were picked up. The value was instead taken from an entry in
ACMCodecDB.
Since it was not-fully-functional, its exact value didn't seem to
matter and it was getting in the way of making it possible to supply
an external audio encoder factory, I've decided to remove it
altogether. The DTMF code now uses an interval of 50 ms regardless,
which is a value recommended by the RFC.
BUG=webrtc:5806
Review-Url: https://codereview.webrtc.org/2545753002
Cr-Commit-Position: refs/heads/master@{#15380}
Prior to this change, FlexFEC packets that were paced would be lost in
the RTPSender, since they were not stored in a packet history. This CL
introduces such a packet history, as well as the needed wireup for
higher layers to be aware that the particular RTPSender is able to
send FlexFEC packets with a particular SSRC.
Updated RTPSender unit test to reflect the fact that paced packets
are now actually sent.
BUG=webrtc:5654
Review-Url: https://codereview.webrtc.org/2491293002
Cr-Commit-Position: refs/heads/master@{#15066}
- Change const ptr to const ref in parameter list.
Using nullptr as argument was invalid, so no need to send
pointer instead of reference.
- Change return type to void or bool, where appropriate
BUG=webrtc:5654
Review-Url: https://codereview.webrtc.org/2455963003
Cr-Commit-Position: refs/heads/master@{#14945}
Prior to this change, we signalled that ULPFEC was disabled
through a bool, but that RED was disabled by setting its
payload type to -1. The latter is consistent with how we
disable RED/ULPFEC in the config, so this CL removes the
ULPFEC bool from the {,Set}UlpfecConfig chain of member
functions.
BUG=webrtc:5654
Review-Url: https://codereview.webrtc.org/2460533002
Cr-Commit-Position: refs/heads/master@{#14944}
At the same time, change to using int's instead of uint8_t's for the payload type.
This allows us to signal disabled FEC or RED using the sentinel value -1, which
is commonplace in other parts of the code.
These APIs will be deprecated when ULPFEC is deprecated.
BUG=webrtc:5654
Review-Url: https://codereview.webrtc.org/2448463003
Cr-Commit-Position: refs/heads/master@{#14942}
structs are exactly the same but last one follow naming style.
BUG=webrtc:5565
Review-Url: https://codereview.webrtc.org/2368983002
Cr-Commit-Position: refs/heads/master@{#14415}
Instead of full RtpRtcpImpl takes interface of all functions it needs from it.
Added single function for parsing packets and sending feedback, moving that
logic from RtpRtcpImpl to RtcpReceiver.
BUG=webrtc:5260
Review-Url: https://codereview.webrtc.org/2274573002
Cr-Commit-Position: refs/heads/master@{#13960}
function names style updated,
unused return type removed.
Comment style fixed, redundant comments removed.
pass-by-pointer parameter changed to pass-by-value because can't be nullptr any more.
NOTRY=true
BUG=webrtc:5565
Review-Url: https://codereview.webrtc.org/2258523005
Cr-Commit-Position: refs/heads/master@{#13848}
by cleaning RTCPReceiveInfo class
and following cleaning of RTCPReceiver::BoundingSet function.
BUG=webrtc:5565
Review-Url: https://codereview.webrtc.org/2254703003
Cr-Commit-Position: refs/heads/master@{#13817}
The last in-tree call site recently disappeared, so they were unused.
BUG=webrtc:5922
Review-Url: https://codereview.webrtc.org/2066473002
Cr-Commit-Position: refs/heads/master@{#13751}
Reason for revert:
broke browser_tests
Original issue's description:
> Add EncodedImageCallback::OnEncodedImage().
>
> OnEncodedImage() is going to replace Encoded(), which is deprecated now.
> The new OnEncodedImage() returns Result struct that contains frame_id,
> which tells the encoder RTP timestamp for the frame.
>
> BUG=chromium:621691
> R=niklas.enbom@webrtc.org, sprang@webrtc.org, stefan@webrtc.org
>
> Committed: https://crrev.com/4c7f4cd2ef76821edca6d773d733a924b0bedd25
> Committed: https://crrev.com/ad34dbe934d47f88011045671b4aea00dbd5a795
> Cr-Original-Commit-Position: refs/heads/master@{#13613}
> Cr-Commit-Position: refs/heads/master@{#13615}
TBR=pbos@webrtc.org,mflodman@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,niklas.enbom@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2203233002
Cr-Commit-Position: refs/heads/master@{#13616}
Reason for revert:
broke internal tests
Original issue's description:
> Add EncodedImageCallback::OnEncodedImage().
>
> OnEncodedImage() is going to replace Encoded(), which is deprecated now.
> The new OnEncodedImage() returns Result struct that contains frame_id,
> which tells the encoder RTP timestamp for the frame.
>
> BUG=chromium:621691
> R=niklas.enbom@webrtc.org, sprang@webrtc.org, stefan@webrtc.org
>
> Committed: https://crrev.com/ad34dbe934d47f88011045671b4aea00dbd5a795
> Cr-Commit-Position: refs/heads/master@{#13613}
TBR=pbos@webrtc.org,mflodman@webrtc.org,sprang@webrtc.org,stefan@webrtc.org,niklas.enbom@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:621691
Review-Url: https://codereview.webrtc.org/2206743002
Cr-Commit-Position: refs/heads/master@{#13614}
- Renamed variables and some function to comply with style guide.
- Removed default argument values.
- Removed some dead code.
- Cleaned up comments formatting in rtp_rtcp.h
R=danilchap@webrtc.org, stefan@webrtc.org
Review URL: https://codereview.webrtc.org/2067673004 .
Cr-Commit-Position: refs/heads/master@{#13565}
Reason for revert:
Upstream fixes in place, should be OK now.
Original issue's description:
> Revert of Refactor NACK bitrate allocation (patchset #16 id:300001 of https://codereview.webrtc.org/2061423003/ )
>
> Reason for revert:
> Breaks upstream code.
>
> Original issue's description:
> > Refactor NACK bitrate allocation
> >
> > Nack bitrate allocation should not be done on a per-rtp-module basis,
> > but rather shared bitrate pool per call. This CL moves allocation to the
> > pacer and cleans up a bunch if bitrate stats handling.
> >
> > BUG=
> > R=danilchap@webrtc.org, stefan@webrtc.org, tommi@webrtc.org
> >
> > Committed: 5fc59e810b
>
> TBR=tommi@webrtc.org,danilchap@webrtc.org,stefan@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=
>
> Committed: https://crrev.com/e5dd44101eca485f5ad12e5f7ce6f6b0d204116b
> Cr-Commit-Position: refs/heads/master@{#13417}
TBR=tommi@webrtc.org,danilchap@webrtc.org,stefan@webrtc.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=
Review-Url: https://codereview.webrtc.org/2146013002
Cr-Commit-Position: refs/heads/master@{#13465}
Reason for revert:
It keeps breaking upstream.
Original issue's description:
> Reland Issue 2061423003: Refactor NACK bitrate allocation
>
> This is a reland of https://codereview.webrtc.org/2061423003/
> Which was reverted in https://codereview.webrtc.org/2131913003/
>
> The reason for the revert was that some upstream code used
> RtpSender::SetTargetBitrate(). I've added that back as a no-op until we
> it's been brought up to date.
>
> TBR=tommi@webrtc.org
>
> Committed: 05ce4ae31fTBR=tommi@webrtc.org,sprang@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.webrtc.org/2130423002
Cr-Commit-Position: refs/heads/master@{#13419}
Reason for revert:
Breaks upstream code.
Original issue's description:
> Refactor NACK bitrate allocation
>
> Nack bitrate allocation should not be done on a per-rtp-module basis,
> but rather shared bitrate pool per call. This CL moves allocation to the
> pacer and cleans up a bunch if bitrate stats handling.
>
> BUG=
> R=danilchap@webrtc.org, stefan@webrtc.org, tommi@webrtc.org
>
> Committed: 5fc59e810bTBR=tommi@webrtc.org,danilchap@webrtc.org,stefan@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review-Url: https://codereview.webrtc.org/2131913003
Cr-Commit-Position: refs/heads/master@{#13417}
This CL adds support for an extension on RTP frames to allow the sender
to specify the minimum and maximum playout delay limits.
The receiver makes a best-effort attempt to keep the capture-to-render delay
within this range. This allows different types of application to specify
different end-to-end delay goals. For example gaming can support rendering
of frames as soon as received on receiver to minimize delay. A movie playback
application can specify a minimum playout delay to allow fixed buffering
in presence of network jitter.
There are no tests at this time and most of testing is done with chromium
webrtc prototype.
On chromoting performance tests, this extension helps bring down end-to-end
delay by about 150 ms on small frames.
BUG=webrtc:5895
Review-Url: https://codereview.webrtc.org/2007743003
Cr-Commit-Position: refs/heads/master@{#13059}
because in the TMMBRHelp class it is independent of other members.
BUG=webrtc:5565
R=philipel
Review-Url: https://codereview.webrtc.org/1746773002
Cr-Commit-Position: refs/heads/master@{#12669}
Testing the nack module by implementing it into the current jitter buffer
under the experiment WebRTC-NewVideoJitterBuffer.
BUG=webrtc:5514
Review URL: https://codereview.webrtc.org/1778503002
Cr-Commit-Position: refs/heads/master@{#11969}
Reason for revert:
Revert breaks other uses, a fix will be rolled into Chromium instead.
Original issue's description:
> Revert of Remove ignored return code from modules. (patchset #3 id:40001 of https://codereview.webrtc.org/1703833002/ )
>
> Reason for revert:
> Breaks Chromium.
>
> Original issue's description:
> > Remove ignored return code from modules.
> >
> > ModuleProcessImpl doesn't act on return codes and having them around is
> > confusing (it's unclear what an error return code here would do even).
> >
> > BUG=
> > R=tommi@webrtc.org
> >
> > Committed: f14c47a58c
>
> TBR=tommi@webrtc.org,pbos@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=
>
> Committed: https://crrev.com/da33a8a2a22f6d19ba2a8cce963beafbdbaa8fd8
> Cr-Commit-Position: refs/heads/master@{#11761}
TBR=tommi@webrtc.org,torbjorng@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.webrtc.org/1737013002
Cr-Commit-Position: refs/heads/master@{#11762}
Reason for revert:
Breaks Chromium.
Original issue's description:
> Remove ignored return code from modules.
>
> ModuleProcessImpl doesn't act on return codes and having them around is
> confusing (it's unclear what an error return code here would do even).
>
> BUG=
> R=tommi@webrtc.org
>
> Committed: f14c47a58cTBR=tommi@webrtc.org,pbos@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.webrtc.org/1736663004
Cr-Commit-Position: refs/heads/master@{#11761}
ModuleProcessImpl doesn't act on return codes and having them around is
confusing (it's unclear what an error return code here would do even).
BUG=
R=tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1703833002 .
Cr-Commit-Position: refs/heads/master@{#11747}
This is needed because the target is defined in webrtc/common.gyp
and its current location crosses package boundaries when generating
projects for some build systems.
NOTRY=True
Review URL: https://codereview.webrtc.org/1665603003
Cr-Commit-Position: refs/heads/master@{#11496}
Adds negotiation of rtx codecs for red and vp9. To keep backwards
compatibility with older Chrome versions, this change includes two
hacks:
1. Red packets will be retransmitted over the rtx codec associated with
vp8 if no rtx codec is associated with red. This is how Chrome does
it today and ensures that we still can send red over rtx to older
versions.
2. If rtx packets associated with the media codec (vp8/vp9 etc) are
received and red has been negotiated, we will assume that the sender
incorrectly has packetized red inside the rtx header associated with
media. We will therefore restore it with the red payload type
instead, which ensures that we can still receive rtx associated with
red from old versions.
Offering multiple rtx codecs to older versions should not be a problem
since old versions themselves only try to negotiate rtx for vp8.
R=pbos@webrtc.orgTBR=mflodman@webrtc.org
BUG=webrtc:4024
TEST=Verified by running apprtc and emulating packet loss between Chrome with and without the patch.
Review URL: https://codereview.webrtc.org/1649493004 .
Cr-Commit-Position: refs/heads/master@{#11472}
This changes the following module directories:
* webrtc/modules/audio_conference_mixer/interface
* webrtc/modules/interface
* webrtc/modules/media_file/interface
* webrtc/modules/rtp_rtcp/interface
* webrtc/modules/utility/interface
To avoid breaking downstream, I followed this recipe:
1. Copy the interface dir to a new sibling directory: include
2. Update the header guards in the include directory to match the style guide.
3. Update the header guards in the interface directory to match the ones in include. This is required to avoid getting redefinitions in the not-yet-updated downstream code.
4. Add a pragma warning in the header files in the interface dir. Example:
#pragma message("WARNING: webrtc/modules/interface is DEPRECATED; "
"use webrtc/modules/include")
5. Search for all source references to webrtc/modules/interface and update them to webrtc/modules/include (*.c*,*.h,*.mm,*.S)
6. Update all GYP+GN files. This required manual inspection since many subdirectories of webrtc/modules referenced the interface dir using ../interface etc(*.gyp*,*.gn*)
BUG=5095
TESTED=Passing compile-trybots with --clobber flag:
git cl try --clobber --bot=win_compile_rel --bot=linux_compile_rel --bot=android_compile_rel --bot=mac_compile_rel --bot=ios_rel -m tryserver.webrtc
R=stefan@webrtc.org, tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1417683006 .
Cr-Commit-Position: refs/heads/master@{#10500}
Starts by removing channel/engine id from ViEChannel which propagates
down to the RTP/RTCP module as well as the transport class.
IncomingVideoStream::RenderFrame() is untouched for now but receives a
fake id instead of the previous channel id. Added a TODO to remove it
later but the RenderFrame call is implemented in a lot of
platform-dependent files and should probably remove the "manager" aspect
of renderers, so preferring to do it separately
BUG=webrtc:1695
R=henrika@webrtc.org, mflodman@webrtc.org
Review URL: https://codereview.webrtc.org/1335353005 .
Cr-Commit-Position: refs/heads/master@{#9978}
For use when send-side bandwidth estimation is enabled.
Receive times need to be captured, buffered and then sent using
TransportFeedback RTCP messaged back to the send side.
BUG=webrtc:4173
Review URL: https://codereview.webrtc.org/1290813008
Cr-Commit-Position: refs/heads/master@{#9898}
