Also refactor packet router to use a map rather than iterate over all
rtp modules for each packet sent.
BUG=webrtc:4311
Review URL: https://codereview.webrtc.org/1247293002
Cr-Commit-Position: refs/heads/master@{#9670}
Adds a class used to classify whether packet loss events are a single packet or multiple packets as well as how many packets have been lost. Also exposes a new function in the RtpRtcp interface to retrieve these statistics.
BUG=
Review URL: https://codereview.webrtc.org/1198853004
Cr-Commit-Position: refs/heads/master@{#9568}
The main purpose of this CL is to clean up RTCPSender::PrepareRTCP, but
it has quite a few ramifications. Notable changes:
* Removed the rtcpPacketTypeFlags bit vector and don't assume
RTCPPacketType values have a single unique bit set. This will allow
making this an enum class once rtcp_receiver has been overhauled.
* Flags are now stored in a map that is a member of the class. This
meant we could remove some bool flags (eg send_remb_) which was
previously masked into rtcpPacketTypeFlags and then masked out again
when testing if a remb packet should be sent.
* Make all build methods, eg. BuildREMB(), have the same signature.
An RtcpContext struct was introduced for this purpose. This allowed
the use of a map from RTCPPacketType to method pointer. Instead of
18 consecutive if-statements, there is now a single loop.
The context class also allowed some simplifications in the build
methods themselves.
* A few minor simplifications and cleanups.
The next step is to gradually replace the builder methods with the
builders from the new RtcpPacket classes.
BUG=2450
R=asapersson@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/48329004
Cr-Commit-Position: refs/heads/master@{#9166}
Since RTCP packets are delivered to both senders and receivers that
correspond the receivers currently log that NACKed packets are missing,
since they have no direct connection to the sending side or the RTP
packet history. Also preventing triggering on SR requests and PLI/FIR.
BUG=
R=asapersson@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/45249004
Cr-Commit-Position: refs/heads/master@{#9071}
This implementation registers RTX-APT map inside RTP sender and receiver.
While it only generates SDP with RTX associated with VP8 to make it
compatible with previous Chrome versions.
Should add following changes after reaches stable,
* Use RTX-APT map for building and restoring RTP packets.
* Add RTX support for RED or VP9 in Video engine.
* Set RTX payload type for RED inside FecConfig in EndToEndTest.
BUG=4024
R=mflodman@webrtc.org, pbos@webrtc.org, pthatcher@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/36889004
Cr-Commit-Position: refs/heads/master@{#9040}
Clang version changed 223108:230914
Details: e144d30..6fdb142/tools/clang/scripts/update.sh
Removes the OVERRIDE macro defined in:
* webrtc/base/common.h
* webrtc/typedefs.h
The majority of the source changes were done by running this in src/:
perl -0pi -e "s/virtual\s([^({;]*(\([^({;]*\)[^({;]*))(OVERRIDE|override)/\1override/sg" `find {talk,webrtc} -name "*.h" -o -name "*.cc*" -o -name "*.mm*"`
which converted all:
virtual Foo() OVERRIDE
functions to:
Foo() override
Then I manually edited:
* talk/media/webrtc/fakewebrtccommon.h
* webrtc/test/fake_common.h
Remaining uses of OVERRIDE was fixed by search+replace.
Manual edits were done to fix virtual destructors that were
overriding inherited ones.
Finally a build error related to the pure virtual definitions of
Read, Write and Rewind in common_types.h required a bit of
refactoring in:
* webrtc/common_types.cc
* webrtc/common_types.h
* webrtc/system_wrappers/interface/file_wrapper.h
* webrtc/system_wrappers/source/file_impl.cc
This roll should make it possible for us to finally re-enable deadlock
detection for TSan on the buildbots.
BUG=4106
R=pbos@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41069004
Cr-Commit-Position: refs/heads/master@{#8596}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8596 4adac7df-926f-26a2-2b94-8c16560cd09d
This cl just moves the logic form the default module
SetTargetSendBitrates to PayloadRouter. There might be glitch / mismatch
in size between trate the vector and rtp modules. This was the same in
the default module and is quite hard to protect from before we have the
new video API.
I also removed some test form rtp_rtcp_impl_unittest that were affected
by this change. The test tests code that isn't implemented, hence the
DISABLED_, and this will never be implemented in the RTP module, rather
the payload router in the future.
BUG=769
R=pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/42419004
Cr-Commit-Position: refs/heads/master@{#8453}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8453 4adac7df-926f-26a2-2b94-8c16560cd09d
Removes lock-order inversion formed by RTPSenderAudio->RTPSender calls
by doing a lot shorter locking which fetches a current state of
RTPSenderAudio variables before sending.
Thread annotates locked variables and removes one lock in
RTPSenderAudio, bonus fixes data races reported in voe_auto_test
--automated under TSan (DTMF data race).
Also includes some bonus cleanup of RTPSenderVideo which removes the
send critsect completely as all methods using it was always called
from RTPSender under its send_critsect.
R=henrik.lundin@webrtc.org, stefan@webrtc.org, tommi@webrtc.org
BUG=3001, chromium:454654
Review URL: https://webrtc-codereview.appspot.com/41869004
Cr-Commit-Position: refs/heads/master@{#8348}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8348 4adac7df-926f-26a2-2b94-8c16560cd09d
Reasons for revert:
1. glaznev discovered potentially related problems using the Android AppRTCDemo.
2. We're trying to do an M41 webrtc roll in Chromium, and this CL is risky.
> Support associated payload type when registering Rtx payload type.
>
> Major changes include,
> - Add associated payload type for SetRtxSendPayloadType & SetRtxReceivePayloadType.
> - Receiver: Restore RTP packets by the new RTX-APT map.
> - Sender: Send RTP packets by checking RTX-APT map.
> - Add RTX payload type for RED in the default codec list.
>
> BUG=4024
> R=pbos@webrtc.org, stefan@webrtc.org
> TBR=mflodman@webrtc.org
>
> Review URL: https://webrtc-codereview.appspot.com/26259004
>
> Patch from Changbin Shao <changbin.shao@intel.com>.
TBR=pbos@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/33829004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8033 4adac7df-926f-26a2-2b94-8c16560cd09d
This should fix the following error I'm seeing in Win8 GN trybot:
e:\b\build\slave\win_gn\build\src\third_party\webrtc\modules\bitrate_controller\bitrate_controller_impl.cc(78)
: error C2220: warning treated as error - no 'object' file generated
e:\b\build\slave\win_gn\build\src\third_party\webrtc\modules\bitrate_controller\bitrate_controller_impl.cc(30)
: warning C4373:
'webrtc::BitrateControllerImpl::RtcpBandwidthObserverImpl::OnReceivedEstimatedBitrate':
virtual function overrides 'webrtc::RtcpBandwidthObserver::OnReceivedEstimatedBitrate',
previous versions of the compiler did not override when parameters only differed by const/volatile qualifiers
e:\b\build\slave\win_gn\build\src\third_party\webrtc\modules\rtp_rtcp\interface\rtp_rtcp_defines.h(286)
: see declaration of 'webrtc::RtcpBandwidthObserver::OnReceivedEstimatedBitrate'
http://build.chromium.org/p/tryserver.chromium.win/builders/win8_chromium_gn_dbg/builds/23/steps/compile/logs/stdio
The above was triggered in CL https://codereview.chromium.org/802113002/
BUG=None
R=kjellander@google.com, kjellander@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37409004
Patch from Thiago Farina <tfarina@chromium.org>.
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7911 4adac7df-926f-26a2-2b94-8c16560cd09d
This fixes a variety of MSVC warnings about value truncations when implicitly
storing the 64-bit values we get back from e.g. TimeTicks in 32-bit objects, and
removes the need for a number of explicit casts.
This also moves a number of constants so they're declared right where they're used, which is easier to read and maintain, and makes some of them of integral type rather than using the "enum hack".
BUG=chromium:81439
TEST=none
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/33649004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7905 4adac7df-926f-26a2-2b94-8c16560cd09d
RemoteNtpTimeEstimator needed user to give a remote SSRC and it intended to call RtpRtcp module to obtain RTT, to be able to calculate Ntp time.
When RTT cannot be directly obtained from the RtpRtcp module with the specified SSRC, RemoteNtpTimeEstimator would fail.
This change allows RemoteNtpTimeEstimator to calculate NTP with an external RTT estimate.
An immediate benefit is that capture_start_ntp_time_ms_ can be obtained in a Google hangout call.
BUG=
TEST=chromium + hangout call
R=stefan@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/24879004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7407 4adac7df-926f-26a2-2b94-8c16560cd09d
Changes include,
1) Introduce class RtpPacketizerGeneric & RtpDePacketizerGeneric.
2) Introduce class RtpDepacketizerVp8.
3) Make RTPSenderVideo::SendH264 generic and used by all packetizers.
4) Move codec specific functions from RTPSenderVideo/RTPReceiverVideo to
RtpPacketizer/RtpDePacketizer sub-classes.
R=pbos@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/26399004
Patch from Changbin Shao <changbin.shao@intel.com>.
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7163 4adac7df-926f-26a2-2b94-8c16560cd09d
