This is a simple application limited region detector that is quite conservative
at the moment. We detect as being application-limited if we see sending rate
as less than 30% of the estimated bandwidth over 500 ms. The moment we detect
a single burst above 30% over a 100 ms period, we consider ourselves network
limited.
This class is currently not used. A follow up CL will leverage this to enable probing.
BUG=webrtc:6332
Review-Url: https://codereview.webrtc.org/2340763004
Cr-Commit-Position: refs/heads/master@{#14505}
Currently, BitrateProber does not scale higher than 2 Mbps to 6 Mbps. The actual
number is dependent on the size of the last packet. If a packet of around 250
bytes is used for probing, it fails above 2 Mbps.
BitrateProber now provides a recommendation on probe size instead of a
packet size. PacedSender utilizes this to decide on the number of packets
per probe. This enables BitrateProber to scale up-to higher bitrates.
Tests with chromoting show it stalls at about 10 Mbps (perhaps due to the
limitation on the simulation pipeline to deliver packets).
BUG=webrtc:6332
Review-Url: https://codereview.webrtc.org/2347023002
Cr-Commit-Position: refs/heads/master@{#14503}
- Removes unnecessary casts to compute timedelta.
- Renames ProbingState for clarity. This should help when we probe mid-call.
- Enables probing by default to avoid checking on each incoming packet.
- Removes duplicate probing state tracking in paced sender. These duplicate
states were conflicting at times.
- Removes passing through packets for bug 5307 which seems long fixed.
- Cleanup handling of time_last_send_ms and avoid side effects of changing
probing state at TimeUntilNextProbe().
- Clear cluster data when probing is restarted to avoid having old data after a reset.
BUG=5859
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/2182603002 .
Cr-Commit-Position: refs/heads/master@{#13612}
1. It moves calculation of the needed padding to VideoSendStream instead of ViEEncoder and only does it once per send Stream instead of every time the network estimate changes.
2. The maximum amount of padding sent was prior to this cl calculated and updated based on network estimate changes. However, it can only change based on encoder configuration changes and if send streams are added or removed. This cl change the VideoSendStream/VieEncoder to notify the BitrateAllocator of changes to the needed padding bitrate and for BitrateAllocator to notify Call of these changes.
3. Fixed an issue in the SendPacer where it could send a padding packet before sending a real packet. This caused the test EndToEndTest.RestartingSendStreamPreservesRtpStatesWithRtx to fail with these refactorings since the pacer suddenly could send a padding packet before the encoder had produced its first frame.
BUG=webrtc:5687
Review-Url: https://codereview.webrtc.org/1993113003
Cr-Commit-Position: refs/heads/master@{#13149}
This reverts commit e30c27205148b34ba421184efe65f6a0780b436d (https://codereview.webrtc.org/1958053002/)
Original reverted cl is in patch set #1.
Changes in following patch sets.
The cl now also make sure SendPacer starts with the configured bitrate provided in a call to CongestionController::SetBweBitrates)()
It turns out that the failing tests in 609816 is due to a bug in the current code that runs the proper at 300kbit regardless of configured start bitrate.
Original cl description:
Remove SendPacer from ViEEncoder
This CL moves the logic where the ViEEncoder pause if the pacer is full to the BitrateController. If the queue is full, the controller reports a bitrate of zero to Call (and BitrateAllocator)
BUG=chromium:609816, webrtc:5687
TBR=mflodman@webrtc.org
NOTRY=True // Due to bug in android_x86 cq builder....
Review-Url: https://codereview.webrtc.org/1958113003
Cr-Commit-Position: refs/heads/master@{#12688}
This reverts commit 825eb58d59940a4c3c9837595c4b3b07059c93ca.
This Relands the cl reviewed in https://codereview.webrtc.org/1917793002/
patchset #1 is a pure reland.
patchset #2 fix an overflow in BitrateProber that caused WebRtcVideoChannel2BaseTest.TwoStreamsSendAndReceive to fail.
Original cl description:
Remove SendPacer from ViEEncoder
This CL moves the logic where the ViEEncoder pause if the pacer is full to the BitrateController. If the queue is full, the controller reports a bitrate of zero to Call (and BitrateAllocator)
R=stefan@webrtc.orgTBR=mflodman@webrtc.org
BUG=webrtc:5687
Review URL: https://codereview.webrtc.org/1947873002 .
Cr-Commit-Position: refs/heads/master@{#12630}
This CL moves the logic where the ViEEncoder pause if the pacer is full to the BitrateController. If the queue is full, the controller reports a bitrate of zero to Call (and BitrateAllocator)
BUG=webrtc:5687
Review-Url: https://codereview.webrtc.org/1917793002
Cr-Commit-Position: refs/heads/master@{#12620}
Except in places where this would break out-of-tree code,
such as Chromium.
BUG=webrtc:5520
Review URL: https://codereview.webrtc.org/1785173002
Cr-Commit-Position: refs/heads/master@{#12037}
Reason for revert:
Revert breaks other uses, a fix will be rolled into Chromium instead.
Original issue's description:
> Revert of Remove ignored return code from modules. (patchset #3 id:40001 of https://codereview.webrtc.org/1703833002/ )
>
> Reason for revert:
> Breaks Chromium.
>
> Original issue's description:
> > Remove ignored return code from modules.
> >
> > ModuleProcessImpl doesn't act on return codes and having them around is
> > confusing (it's unclear what an error return code here would do even).
> >
> > BUG=
> > R=tommi@webrtc.org
> >
> > Committed: f14c47a58c
>
> TBR=tommi@webrtc.org,pbos@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=
>
> Committed: https://crrev.com/da33a8a2a22f6d19ba2a8cce963beafbdbaa8fd8
> Cr-Commit-Position: refs/heads/master@{#11761}
TBR=tommi@webrtc.org,torbjorng@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.webrtc.org/1737013002
Cr-Commit-Position: refs/heads/master@{#11762}
Reason for revert:
Breaks Chromium.
Original issue's description:
> Remove ignored return code from modules.
>
> ModuleProcessImpl doesn't act on return codes and having them around is
> confusing (it's unclear what an error return code here would do even).
>
> BUG=
> R=tommi@webrtc.org
>
> Committed: f14c47a58cTBR=tommi@webrtc.org,pbos@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.webrtc.org/1736663004
Cr-Commit-Position: refs/heads/master@{#11761}
ModuleProcessImpl doesn't act on return codes and having them around is
confusing (it's unclear what an error return code here would do even).
BUG=
R=tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1703833002 .
Cr-Commit-Position: refs/heads/master@{#11747}
Currently we limit the enocder so that frames aren't encoded if the
expected pacer queue is longer than 2s. However, if the queue is full
and the bitrate suddenly drops (or there is a large overshoot), the
queue time can be long than the limit.
This CL allows the pacer to temporarily boost the pacing bitrate over
the 2s window.
BUG=
Review URL: https://codereview.webrtc.org/1412293003
Cr-Commit-Position: refs/heads/master@{#10729}
