12 Commits

Author SHA1 Message Date
isheriff
3168781d2f Add AlrDetector
This is a simple application limited region detector that is quite conservative
at the moment. We detect as being application-limited if we see sending rate
as less than 30% of the estimated bandwidth over 500 ms. The moment we detect
a single burst above 30% over a 100 ms period, we consider ourselves network
limited.

This class is currently not used. A follow up CL will leverage this to enable probing.

BUG=webrtc:6332

Review-Url: https://codereview.webrtc.org/2340763004
Cr-Commit-Position: refs/heads/master@{#14505}
2016-10-04 15:43:15 +00:00
Henrik Kjellander
0b9e29c87d Remove include dirs from modules/{media_file,pacing}
Also move files out of media_file/source.

BUG=webrtc:5095
TESTED=git cl try -c --bot=android_compile_rel --bot=linux_compile_rel --bot=win_compile_rel --bot=mac_compile_rel --bot=ios_rel --bot=linux_gn_rel --bot=win_x64_gn_rel --bot=mac_x64_gn_rel --bot=android_gn_rel -m tryserver.webrtc
R=asapersson@webrtc.org, perkj@webrtc.org, tommi@webrtc.org

Review URL: https://codereview.webrtc.org/1435093002 .

Cr-Commit-Position: refs/heads/master@{#10647}
2015-11-16 10:12:32 +00:00
sprang
ebbf8a805b Make sure rtp_rtcp module doesn't directly reference anything in the pacer module, and remove build dependencies on it.
BUG=

Review URL: https://codereview.webrtc.org/1350163005

Cr-Commit-Position: refs/heads/master@{#10005}
2015-09-21 22:11:18 +00:00
sprang
867fb5224e Add support for transport wide sequence numbers
Also refactor packet router to use a map rather than iterate over all
rtp modules for each packet sent.

BUG=webrtc:4311

Review URL: https://codereview.webrtc.org/1247293002

Cr-Commit-Position: refs/heads/master@{#9670}
2015-08-03 11:38:48 +00:00
Stefan Holmer
e590416722 Moving the pacer and the pacer thread to ChannelGroup.
This means all channels within the same group will share the same pacing queue and scheduler. It also means padding will be computed and sent by a single pacer. To accomplish this I also introduce a PacketRouter which finds the RTP module which owns the packet to be paced out.

BUG=4323
R=mflodman@webrtc.org, pbos@webrtc.org

Review URL: https://webrtc-codereview.appspot.com/45549004

Cr-Commit-Position: refs/heads/master@{#8864}
2015-03-26 10:11:22 +00:00
andresp@webrtc.org
86e1e487e7 Move system_wrappers.gyp files to the proper directory.
Build targets should not refer to non-subpaths as was happening before when
 source/system_wrappers.gyp refers to ../interface/ files.

R=kjellander@webrtc.org, tommi@webrtc.org

Review URL: https://webrtc-codereview.appspot.com/37609004

git-svn-id: http://webrtc.googlecode.com/svn/trunk@8057 4adac7df-926f-26a2-2b94-8c16560cd09d
2015-01-14 09:30:52 +00:00
stefan@webrtc.org
82462aade0 Adds support for sending first set of packets at increasingly higher bitrates to probe the link and faster ramp up to a high bitrate.
Also wires up a finch experiment to control this.

R=mflodman@webrtc.org

Review URL: https://webrtc-codereview.appspot.com/30639004

git-svn-id: http://webrtc.googlecode.com/svn/trunk@7505 4adac7df-926f-26a2-2b94-8c16560cd09d
2014-10-23 11:57:05 +00:00
pbos@webrtc.org
04b61790d1 Remove include_dirs from pacing.
BUG=1662
TEST=compile on trybots
R=stefan@webrtc.org

Review URL: https://webrtc-codereview.appspot.com/2292006

git-svn-id: http://webrtc.googlecode.com/svn/trunk@4856 4adac7df-926f-26a2-2b94-8c16560cd09d
2013-09-26 09:23:31 +00:00
kjellander@webrtc.org
6c35e0b0f7 Reorganize test targets in WebRTC
This CL will lower the number of test targets in WebRTC by:

Add common_audio_unittests and merge the following targets into it (copied from http://review.webrtc.org/1584006):
* resampler_unittests
* signal_processing_unittests
* vad_unittests

Merge into modules_unittests:
* bitrate_controller_unittests
* desktop_capture_unittests
* media_file_unittests
* remote_bitrate_estimator_unittests
* rtp_rtcp_unittests
* paced_sender_unittests

Merge into test_support_unittests:
* channel_transport_unittests

channel_transport.gyp was also removed in favor for test.gyp.

I had to remove a main method from rtcp_format_remb_unittest.cc
since it caused the fileutils.h code to not be able to find the
right project root path in ordrer to provide correct paths
to test files.

Buildbot configuration update will be synced with the commit of this CL.

TEST=trybots
BUG=1843
R=andrew@webrtc.org

Review URL: https://webrtc-codereview.appspot.com/1639004

git-svn-id: http://webrtc.googlecode.com/svn/trunk@4213 4adac7df-926f-26a2-2b94-8c16560cd09d
2013-06-11 08:29:17 +00:00
pbos@webrtc.org
6e788df19e Remove vim/emacs modelines from .gypi files
BUG=1655

Review URL: https://webrtc-codereview.appspot.com/1326005

git-svn-id: http://webrtc.googlecode.com/svn/trunk@3857 4adac7df-926f-26a2-2b94-8c16560cd09d
2013-04-16 12:40:34 +00:00
wjia@webrtc.org
a3c82bf667 Remove '<(library)' in gyp files.
This will remove all usage of '<(library)' in all webrtc gyp files. 
Review URL: https://webrtc-codereview.appspot.com/1049005

git-svn-id: http://webrtc.googlecode.com/svn/trunk@3392 4adac7df-926f-26a2-2b94-8c16560cd09d
2013-01-18 23:42:21 +00:00
pwestin@webrtc.org
b518017e71 Adding pacing module, will replace the transmission_bucket in the RTP module.
TESTED=unittest
Review URL: https://webrtc-codereview.appspot.com/930015

git-svn-id: http://webrtc.googlecode.com/svn/trunk@3073 4adac7df-926f-26a2-2b94-8c16560cd09d
2012-11-09 20:56:23 +00:00