The performance test is based on the neteq4_speed_test application. The
bulk of the test code is extracted into a test class, and included into
the neteq_unittest_tools target. The actual gtest that runs the
performance test is implemented in neteq_performance_unittest.cc, and
built as a part of webrtc_perf_tests.
The old stand-alone test application is now made dependent on the new
test class, to avoid code duplication.
BUG=2397
R=andrew@webrtc.org, kjellander@webrtc.org, turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/6749004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5362 4adac7df-926f-26a2-2b94-8c16560cd09d
Recent changes in GYP seem to have broken our previous
"hack" for getting the GYP rule for .isolate files
imported from the Chromium build/isolate.gypi.
The best solution for now is to remove the hack
and check in a copy of Chromium's src/build/isolate.gypi
in WebRTC's build/ dir instead. A similar approach is
used for our build/protoc.gypi file.
TEST=On Linux, I successfully ran:
gclient runhooks
ninja -C out/Release
and verified a bunch of .isolated files were created in
out/Release (which didn't happen before this patch).
I also renamed the build/isolate.gypi from Chromium to
ensure that our own is used and not that one (in case any
paths would be incorrect).
I also ran build/gyp_chromium in a Chromium checkout
with WebRTC in third_party/webrtc having this patch applied
to ensure GYP processing was still working.
Finally, I verified that the same project generation and
compilation from a Chromium checkout worked the way we build
our Android native tests, using:
. build/android/envsetup.sh
GYP_DEFINES="$GYP_DEFINES include_tests=1 enable_tracing=1" gclient runhooks
ninja -C out/Release android_builder_webrtc
BUG=1916
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2338004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4907 4adac7df-926f-26a2-2b94-8c16560cd09d
This is a re-land attempt of http://review.webrtc.org/1673004/
It now includes a build/isolate.gypi in WebRTC that includes the same
file as the one that would be included when WebRTC is used in a Chromium
checkout. It is needed since it is not possible to use variables in GYP's
includes sections.
Implemented according to the instructions at
http://www.chromium.org/developers/testing/isolated-testing
Workflow has been like this:
1. create _run GYP target
2. create a stripped down .isolate file
3. export GYP_DEFINES="$GYP_DEFINES test_isolation_mode=check"
4. runhooks
5. compile
6. test if the test would run (i.e. find it's dependencies) without
actually executing it:
tools/swarm_client/isolate.py run --isolated out/Release/testname.isolated
7. If failing, run the fix_test_cases.py script like this:
tools/swarm_client/googletest/fix_test_cases.py --isolated out/Release/testname.isolated
All tests that run on the bots for WebRTC has got _run target
and .isolate file created.
"Normal tests" that run fine on any machine:
* audio_decoder_unittests
* common_audio_unittests
* common_video_unittests
* metrics_unittests
* modules_tests
* modules_unittests
* neteq_unittests
* system_wrappers_unittests
* test_support_unittests
* tools_unittests
* video_engine_core_unittests
* voice_engine_unittests
Tests that requires bare-metal and audio/video devices:
* audio_device_tests
* video_capture_tests
I also added the isolate boilerplate code for the following
tests that are not yet pure gtest binaries (which means they
cannot run isolated yet):
* video_render_tests
* vie_auto_test
* voe_auto_test
TEST=running isolate.py as described above. WebRTC trybots passing. Created a Chromium checkout with third_party/webrtc ToT and this patch applied, passing the runhooks step.
BUG=1916
R=henrike@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2056004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4590 4adac7df-926f-26a2-2b94-8c16560cd09d
As this breaks the FYI bots in
http://build.chromium.org/p/chromium.webrtc.fyi/waterfall
due to different path to isolate.gypi (which cannot easily
be resolved due to limitations in GYP)
> Isolate GYP target and .isolate files for tests
>
> Implemented according to the instructions at
> http://www.chromium.org/developers/testing/isolated-testing
>
> Workflow has been like this:
> 1. create _run GYP target
> 2. create a stripped down .isolate file
> 3. export GYP_DEFINES="$GYP_DEFINES test_isolation_mode=check"
> 4. runhooks
> 5. compile
> 6. test if the test would run (i.e. find it's dependencies) without
> actually executing it:
> tools/swarm_client/isolate.py run --isolated out/Release/testname.isolated
> 7. If failing, run the fix_test_cases.py script like this:
> tools/swarm_client/fix_test_cases.py --isolated out/Release/testname.isolated
>
> All tests that run on the bots for WebRTC has got _run target
> and .isolate file created.
>
> "Normal tests" that run fine on any machine:
> * audio_decoder_unittests
> * common_audio_unittests
> * common_video_unittests
> * metrics_unittests
> * modules_integrationtests
> * modules_unittests
> * neteq_unittests
> * system_wrappers_unittests
> * test_support_unittests
> * tools_unittests
> * video_engine_core_unittests
> * voice_engine_unittests
>
> Tests that requires bare-metal and audio/video devices:
> * audio_device_integrationtests
> * video_capture_integrationtests
>
> I also added the isolate boilerplate code for the following
> tests that are not yet pure gtest binaries (which means they
> cannot run isolated yet):
> * video_render_integrationtests
> * vie_auto_test
> * voe_auto_test
>
> TEST=running isolate.py as described above.
> BUG=1916
> R=tommi@webrtc.org
>
> Review URL: https://webrtc-codereview.appspot.com/1673004TBR=kjellander@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2040004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4548 4adac7df-926f-26a2-2b94-8c16560cd09d
Implemented according to the instructions at
http://www.chromium.org/developers/testing/isolated-testing
Workflow has been like this:
1. create _run GYP target
2. create a stripped down .isolate file
3. export GYP_DEFINES="$GYP_DEFINES test_isolation_mode=check"
4. runhooks
5. compile
6. test if the test would run (i.e. find it's dependencies) without
actually executing it:
tools/swarm_client/isolate.py run --isolated out/Release/testname.isolated
7. If failing, run the fix_test_cases.py script like this:
tools/swarm_client/fix_test_cases.py --isolated out/Release/testname.isolated
All tests that run on the bots for WebRTC has got _run target
and .isolate file created.
"Normal tests" that run fine on any machine:
* audio_decoder_unittests
* common_audio_unittests
* common_video_unittests
* metrics_unittests
* modules_integrationtests
* modules_unittests
* neteq_unittests
* system_wrappers_unittests
* test_support_unittests
* tools_unittests
* video_engine_core_unittests
* voice_engine_unittests
Tests that requires bare-metal and audio/video devices:
* audio_device_integrationtests
* video_capture_integrationtests
I also added the isolate boilerplate code for the following
tests that are not yet pure gtest binaries (which means they
cannot run isolated yet):
* video_render_integrationtests
* vie_auto_test
* voe_auto_test
TEST=running isolate.py as described above.
BUG=1916
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1673004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4547 4adac7df-926f-26a2-2b94-8c16560cd09d
Test:
-manual test with voe_cmd_test.
-manual test with RTPEncode & NetEqRTPPlay.
-manual test with simpleKenny.
-Bit-exact test of iSAC-swb and iSAC-wb with head revision of trunk. The bit-exactness is confirmed on all files generated by running webrtc/modules/audio_coding/codecs/isac/main/test/QA/runiSACLongtest.txt
Review URL: https://webrtc-codereview.appspot.com/937025
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3226 4adac7df-926f-26a2-2b94-8c16560cd09d
