Flakiness was caused by a race condition between two atomic integers shared by two threads. Fixed by counting bad packets (those not containing the expected extension) instead of the good packets.
The CL also eliminates another possible flake by introducing a test fixture which doesn't automatically start sending audio packets when constructed.
BUG=3340,3356
R=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/14499004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6182 4adac7df-926f-26a2-2b94-8c16560cd09d
From now on it is expected that code linking system_wrappers.gyp:system_wrappers
provides an implementation for field_trial API or links with the default one in
system_wrappers.gyp:field_trial_default.
Note: Since there is no use of webrtc::field_trial API inside webrtc this CL on
itself does not forces the clients to actually define it. It however lays the
API and updates the gyp rules to link with so that it is ready to use.
Tested: Introduced a use of field trial in system wrappers and make sure all
bots were building successfully.
BUG=crbug/367114
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/14489004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6147 4adac7df-926f-26a2-2b94-8c16560cd09d
The design of VoeNetEqStatsTest in voice_engine_unittests depended on
being able to inject a factory for the audio coding module into
voice engine. This functionality is now likely going away, which would
make this test fail to compile. Further, the functionality under test
is mostly ACM functionality, wherefore it makes better sense to test it
at ACM level.
BUG=2996
R=henrika@webrtc.org, turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/12029004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5912 4adac7df-926f-26a2-2b94-8c16560cd09d
Replace the two versions with a single DownConvertToCodecFormat. As
mentioned in comments, this could be further consolidated with
RemixAndResample but we should write a full audio converter class in
that case.
Along the way:
- Fix the bug present in Channel::Demultiplex with mono input and a
stereo codec.
- Remove the 32 kHz max from the OnDataAvailable path. This avoids a
48 -> 32 -> 48 conversion when VoE is passed 48 kHz audio; instead we
get a straight pass-through to ACM. The 32 kHz conversion is still
needed in the RecordedDataIsAvailable path until APM natively supports
48 kHz.
- Merge resampler improvements from ACM1 to ACM2. This allows ACM to
handle 44.1 kHz audio passed to VoE and was originally done here:
https://webrtc-codereview.appspot.com/1590004
- Reuse the RemixAndResample unit tests for DownConvertToCodecFormat.
- Remove unused functions from utility.cc.
BUG=3155,3000,b/12867572
TESTED=voe_cmd_test using both the OnDataAvailable and
RecordedDataIsAvailable paths, with a captured audio format of all
combinations of {44.1,48} kHz and {1,2} channels, running through all
codecs, and finally using both ACM1 and ACM2.
R=henrika@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/11019005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5843 4adac7df-926f-26a2-2b94-8c16560cd09d
- Add ability to VoE to send Absolute Sender Time header extension.
- Refactor handling of RTP header extensions in VoE to work the same as in ViE.
- Add API to enable receiving Absolute Sender Time in VoE.
This is part of the work to include audio packets in bandwidth estimation, for
better accuracy in estimates.
BUG=
TBR=solenberg@webrtc.org,henrikg@webrtc.org,stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9509004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5654 4adac7df-926f-26a2-2b94-8c16560cd09d
Recent changes in GYP seem to have broken our previous
"hack" for getting the GYP rule for .isolate files
imported from the Chromium build/isolate.gypi.
The best solution for now is to remove the hack
and check in a copy of Chromium's src/build/isolate.gypi
in WebRTC's build/ dir instead. A similar approach is
used for our build/protoc.gypi file.
TEST=On Linux, I successfully ran:
gclient runhooks
ninja -C out/Release
and verified a bunch of .isolated files were created in
out/Release (which didn't happen before this patch).
I also renamed the build/isolate.gypi from Chromium to
ensure that our own is used and not that one (in case any
paths would be incorrect).
I also ran build/gyp_chromium in a Chromium checkout
with WebRTC in third_party/webrtc having this patch applied
to ensure GYP processing was still working.
Finally, I verified that the same project generation and
compilation from a Chromium checkout worked the way we build
our Android native tests, using:
. build/android/envsetup.sh
GYP_DEFINES="$GYP_DEFINES include_tests=1 enable_tracing=1" gclient runhooks
ninja -C out/Release android_builder_webrtc
BUG=1916
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2338004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4907 4adac7df-926f-26a2-2b94-8c16560cd09d
This is a re-land attempt of http://review.webrtc.org/1673004/
It now includes a build/isolate.gypi in WebRTC that includes the same
file as the one that would be included when WebRTC is used in a Chromium
checkout. It is needed since it is not possible to use variables in GYP's
includes sections.
Implemented according to the instructions at
http://www.chromium.org/developers/testing/isolated-testing
Workflow has been like this:
1. create _run GYP target
2. create a stripped down .isolate file
3. export GYP_DEFINES="$GYP_DEFINES test_isolation_mode=check"
4. runhooks
5. compile
6. test if the test would run (i.e. find it's dependencies) without
actually executing it:
tools/swarm_client/isolate.py run --isolated out/Release/testname.isolated
7. If failing, run the fix_test_cases.py script like this:
tools/swarm_client/googletest/fix_test_cases.py --isolated out/Release/testname.isolated
All tests that run on the bots for WebRTC has got _run target
and .isolate file created.
"Normal tests" that run fine on any machine:
* audio_decoder_unittests
* common_audio_unittests
* common_video_unittests
* metrics_unittests
* modules_tests
* modules_unittests
* neteq_unittests
* system_wrappers_unittests
* test_support_unittests
* tools_unittests
* video_engine_core_unittests
* voice_engine_unittests
Tests that requires bare-metal and audio/video devices:
* audio_device_tests
* video_capture_tests
I also added the isolate boilerplate code for the following
tests that are not yet pure gtest binaries (which means they
cannot run isolated yet):
* video_render_tests
* vie_auto_test
* voe_auto_test
TEST=running isolate.py as described above. WebRTC trybots passing. Created a Chromium checkout with third_party/webrtc ToT and this patch applied, passing the runhooks step.
BUG=1916
R=henrike@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2056004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4590 4adac7df-926f-26a2-2b94-8c16560cd09d
As this breaks the FYI bots in
http://build.chromium.org/p/chromium.webrtc.fyi/waterfall
due to different path to isolate.gypi (which cannot easily
be resolved due to limitations in GYP)
> Isolate GYP target and .isolate files for tests
>
> Implemented according to the instructions at
> http://www.chromium.org/developers/testing/isolated-testing
>
> Workflow has been like this:
> 1. create _run GYP target
> 2. create a stripped down .isolate file
> 3. export GYP_DEFINES="$GYP_DEFINES test_isolation_mode=check"
> 4. runhooks
> 5. compile
> 6. test if the test would run (i.e. find it's dependencies) without
> actually executing it:
> tools/swarm_client/isolate.py run --isolated out/Release/testname.isolated
> 7. If failing, run the fix_test_cases.py script like this:
> tools/swarm_client/fix_test_cases.py --isolated out/Release/testname.isolated
>
> All tests that run on the bots for WebRTC has got _run target
> and .isolate file created.
>
> "Normal tests" that run fine on any machine:
> * audio_decoder_unittests
> * common_audio_unittests
> * common_video_unittests
> * metrics_unittests
> * modules_integrationtests
> * modules_unittests
> * neteq_unittests
> * system_wrappers_unittests
> * test_support_unittests
> * tools_unittests
> * video_engine_core_unittests
> * voice_engine_unittests
>
> Tests that requires bare-metal and audio/video devices:
> * audio_device_integrationtests
> * video_capture_integrationtests
>
> I also added the isolate boilerplate code for the following
> tests that are not yet pure gtest binaries (which means they
> cannot run isolated yet):
> * video_render_integrationtests
> * vie_auto_test
> * voe_auto_test
>
> TEST=running isolate.py as described above.
> BUG=1916
> R=tommi@webrtc.org
>
> Review URL: https://webrtc-codereview.appspot.com/1673004TBR=kjellander@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2040004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4548 4adac7df-926f-26a2-2b94-8c16560cd09d
Implemented according to the instructions at
http://www.chromium.org/developers/testing/isolated-testing
Workflow has been like this:
1. create _run GYP target
2. create a stripped down .isolate file
3. export GYP_DEFINES="$GYP_DEFINES test_isolation_mode=check"
4. runhooks
5. compile
6. test if the test would run (i.e. find it's dependencies) without
actually executing it:
tools/swarm_client/isolate.py run --isolated out/Release/testname.isolated
7. If failing, run the fix_test_cases.py script like this:
tools/swarm_client/fix_test_cases.py --isolated out/Release/testname.isolated
All tests that run on the bots for WebRTC has got _run target
and .isolate file created.
"Normal tests" that run fine on any machine:
* audio_decoder_unittests
* common_audio_unittests
* common_video_unittests
* metrics_unittests
* modules_integrationtests
* modules_unittests
* neteq_unittests
* system_wrappers_unittests
* test_support_unittests
* tools_unittests
* video_engine_core_unittests
* voice_engine_unittests
Tests that requires bare-metal and audio/video devices:
* audio_device_integrationtests
* video_capture_integrationtests
I also added the isolate boilerplate code for the following
tests that are not yet pure gtest binaries (which means they
cannot run isolated yet):
* video_render_integrationtests
* vie_auto_test
* voe_auto_test
TEST=running isolate.py as described above.
BUG=1916
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1673004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4547 4adac7df-926f-26a2-2b94-8c16560cd09d
The complexity of the last ChannelManager and potentially usage of it as well caused race conditions and deadlocks in loopback voe_auto_test. This ref-counted solution takes no long-term locks, uses less locks overall and is significantly easier to understand.
ScopedChannel has been split up into a ChannelOwner with a reference to a channel and an Iterator over ChannelManager. Previous code was really used for both things. ChannelOwner is used as a shared pointer to a channel object, while an Iterator should work as expected.
BUG=2081
R=tommi@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1802004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4502 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL will lower the number of test targets in WebRTC by:
Add common_audio_unittests and merge the following targets into it (copied from http://review.webrtc.org/1584006):
* resampler_unittests
* signal_processing_unittests
* vad_unittests
Merge into modules_unittests:
* bitrate_controller_unittests
* desktop_capture_unittests
* media_file_unittests
* remote_bitrate_estimator_unittests
* rtp_rtcp_unittests
* paced_sender_unittests
Merge into test_support_unittests:
* channel_transport_unittests
channel_transport.gyp was also removed in favor for test.gyp.
I had to remove a main method from rtcp_format_remb_unittest.cc
since it caused the fileutils.h code to not be able to find the
right project root path in ordrer to provide correct paths
to test files.
Buildbot configuration update will be synced with the commit of this CL.
TEST=trybots
BUG=1843
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1639004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4213 4adac7df-926f-26a2-2b94-8c16560cd09d
