All AudioDecoder subclasses have historically lived in NetEq, but they
fit better with the codec they wrap.
BUG=webrtc:4557
Review URL: https://codereview.webrtc.org/1348613003
Cr-Commit-Position: refs/heads/master@{#10015}
The functions were essentially no-op. Also removing forward declaration
of ACMDTMFDetection, which was not used.
BUG=3520
Review URL: https://codereview.webrtc.org/1356543003
Cr-Commit-Position: refs/heads/master@{#9982}
We must remove dependency on Chromium, i.e. we can't use Chromium's base/logging.h. That means we need to define these macros in WebRTC also when doing Chromium builds. And this causes redefinition.
Alternative solutions:
* Check if we already have defined e.g. CHECK, and don't define them in that case. This makes us depend on include order in Chromium, which is not acceptable.
* Don't allow using the macros in WebRTC headers. Error prone since if someone adds it there by mistake it may compile fine, but later break if a header in added or order is changed in Chromium. That will be confusing and hard to enforce.
* Ensure that headers that are included by an embedder don't include our macros. This would require some heavy refactoring to be maintainable and enforcable.
* Changes in Chromium for this is obviously not an option.
BUG=chromium:468375
NOTRY=true
Review URL: https://codereview.webrtc.org/1335923002
Cr-Commit-Position: refs/heads/master@{#9964}
We must remove dependency on Chromium, i.e. we can't use Chromium's base/logging.h. That means we need to define these macros in WebRTC also when doing Chromium builds. And this causes redefinition.
* DISALLOW_ASSIGN -> RTC_DISALLOW_ASSIGN
* DISALLOW_COPY_AND_ASSIGN -> RTC_DISALLOW_COPY_AND_ASSIGN
* DISALLOW_IMPLICIT_CONSTRUCTORS -> RTC_DISALLOW_IMPLICIT_CONSTRUCTORS
Related CL: https://codereview.webrtc.org/1335923002/
BUG=chromium:468375
NOTRY=true
Review URL: https://codereview.webrtc.org/1345433002
Cr-Commit-Position: refs/heads/master@{#9953}
If we don't, we'll end up crashing if they're enabled when the speech
encoder is in the middle of encoding a packet, since CNG and RED
assume that the speech encoder starts out with an empty buffer
(because they need to be in sync with it).
BUG=chromium:490368
Review URL: https://codereview.webrtc.org/1331853002
Cr-Commit-Position: refs/heads/master@{#9917}
This makes the sequence of expected calls easier to read. Also, we can
save one line and get rid of a gmock warning by expecting the
MockAudioEncoder object to be destroyed at the end of the test instead
of making a final marker call.
Review URL: https://codereview.webrtc.org/1331793003
Cr-Commit-Position: refs/heads/master@{#9916}
And the corresponding ACM methods SetISACMaxRate and
SetISACMaxPayloadSize. They were only used in tests.
Review URL: https://codereview.webrtc.org/1311533010
Cr-Commit-Position: refs/heads/master@{#9903}
An option was added to voe_cmd_test to make a RtcEventLog dump.
BUG=webrtc:4741
Review URL: https://codereview.webrtc.org/1267683002
Cr-Commit-Position: refs/heads/master@{#9901}
There's no point in returning a status code, since the max playback rate
is only a suggestion that the encoder is free to disregard.
Review URL: https://codereview.webrtc.org/1332573003
Cr-Commit-Position: refs/heads/master@{#9900}
It makes more sense to combine the two interfaces, since there wasn't
a clear line separating them. The result is a combined interface with
just over a dozen methods, half of which need to be implemented by
every subclass, while the other half have sensible (and trivial)
default implementations and are implemented only by the few subclasses
that need non-default behavior.
Review URL: https://codereview.webrtc.org/1322973004
Cr-Commit-Position: refs/heads/master@{#9894}
Hopefully, this will make it easier to figure out what's wrong the
next time this happens.
BUG=526478
Review URL: https://codereview.webrtc.org/1313073008
Cr-Commit-Position: refs/heads/master@{#9844}
In some cases, the number of samples (per channel) in NetEq's sync
buffer could fall below the allowed minimum (5 samples for narrowband,
scaling for other rates). If the number of samples extracted from the
buffer was smaller than the desired number, an error is
returned. However, if the decoder returns fewer samples than expected,
it could happen that the sync buffer level falls under the minimum,
but enough samples are extracted. This triggered an assert. With this
change, the minimum level of the sync buffer is always enforced.
A test is implemented to trigger the problem. It made the assert fire
without this fix, but it now passes.
BUG=webrtc:4840
R=minyue@webrtc.org
Review URL: https://codereview.webrtc.org/1324453002 .
Cr-Commit-Position: refs/heads/master@{#9828}
The Init() method was previously used to initialize and reset
decoders, and returned an error code. The new Reset() method is used
for reset only; the constructor is now responsible for fully
initializing the AudioDecoder.
Reset() doesn't return an error code; it turned out that none of the
functions it ended up calling could actually fail, so this CL removes
their error return codes as well.
R=henrik.lundin@webrtc.org
Review URL: https://codereview.webrtc.org/1319683002 .
Cr-Commit-Position: refs/heads/master@{#9798}
The Buffer is saved between calls, so after the initial allocation
it'll already be allocated and of the right size. The stack-allocated
array had the advantage of requiring no heap allocation at all, but
for most popular encoders it ended up allocating about 15 kB too much,
and now that we allow user-defined encoders there was also the
(remote) possibility that the buffer would actually be too small.
R=henrik.lundin@webrtc.org
Review URL: https://codereview.webrtc.org/1303413003 .
Cr-Commit-Position: refs/heads/master@{#9789}
With this change, the aggregates for packet waiting times are
calculated in NetEq's StatisticsCalculator insead of in
AcmReceiver. This simplifies things somewhat, and avoids having to
copy the raw data on polling.
R=ivoc@webrtc.org, minyue@webrtc.org
Review URL: https://codereview.webrtc.org/1296633002 .
Cr-Commit-Position: refs/heads/master@{#9778}
By converting three raw pointers to scoped_ptrs, we can eliminate the
need for a manually-defined destructor, and generally sleep better at
night.
R=henrik.lundin@webrtc.org
Review URL: https://codereview.webrtc.org/1310213003 .
Cr-Commit-Position: refs/heads/master@{#9776}
The only shared state is now the bandwidth estimation info.
This reduces the amount and complexity of the locking
substantially.
Review URL: https://codereview.webrtc.org/1208993010
Cr-Commit-Position: refs/heads/master@{#9762}
Re-lands "Renamed the ACMDump to RtcEventLog and moved it to webrtc/video, since it is not specific to the audio coding module."
This reverts commit b933667a7f97697d6390d1eee5f378cedd9ca208.
R=pbos@webrtc.org
Review URL: https://codereview.webrtc.org/1259683003 .
Cr-Commit-Position: refs/heads/master@{#9661}
Prevents presubmit failures when touching audio_coding_module.gypi due
to source files being included from outside the gypi directory.
BUG=
R=minyue@webrtc.org
Review URL: https://codereview.webrtc.org/1262333002 .
Cr-Commit-Position: refs/heads/master@{#9659}
Placed the protobuf structures in the namespace webrtc::rtclog. Removed the message field from the DebugEvent structure, since it was not used.
Added an interface to set config information for VideoReceiveStream and VideoSendStream in the event log.
Added function to log full RTCP packets and changed RTP-logging to only log headers.
Significantly extended the unit tests for RtcEventLog.
R=ivoc@webrtc.org, minyue@webrtc.org, pbos@webrtc.org, stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1230973005 .
Cr-Commit-Position: refs/heads/master@{#9656}
in the ACMDump. The ACMDump interface itself is not updated, so there
is no way (yet) to actually write the configuration fields.
BUG=
Review URL: https://codereview.webrtc.org/1202833003
Cr-Commit-Position: refs/heads/master@{#9519}
This change introduces the sub-class ChangeLogger in AudioCodingModuleImpl. The class writes values to the named UMA histogram, but only if the value has changed since the last time (and always for the first call). This is to avoid the problem with audio codecs being registered but never used. Before this change, these codecs' bitrate was also logged, even though they were never used.
BUG=chromium:488124
R=kwiberg@webrtc.org
Review URL: https://codereview.webrtc.org/1203803004
Cr-Commit-Position: refs/heads/master@{#9506}
This CL logs the target audio bitrate to a UMA histogram called
WebRTC.Audio.TargetBitrateInKbps. It logs the rate when a codec is
created, and when the target is explicitly updated. Note that since
each codec implementation is free to change or ignore the target
value, there is no guarantee that the logged value will actually be
used as the target.
BUG=chromium:488124
Review URL: https://codereview.webrtc.org/1178053002
Cr-Commit-Position: refs/heads/master@{#9484}
Before this change, it could happen that a caller would get a pointer
to the encoder_ but not use it before another thread called the
Reconstruct method, changing the pointer. This of course resulted in
bad access crashes. With this change, each use of the pointer acquired
from the encoder() method is protected by the same lock that is
required to update the pointer. Note that this fix is probably too
aggressive, since it also affects the Opus implementation; the crash
has so far only been seen for iSAC.
Also adding a test to trigger the problem. The test did not trigger
the problem deterministically, but out would typically find it in less
than 1000 runs.
BUG=chromium:499468
R=jmarusic@webrtc.org, kwiberg@webrtc.org
Review URL: https://codereview.webrtc.org/1176303004.
Cr-Commit-Position: refs/heads/master@{#9436}
This includes changes like:
* Attempt to break lines at better positions
* Use "override" in more places, don't use "virtual" with it
* Use {} where the body is more than one line
* Make declaration and definition arg names match
* Eliminate unused code
* EXPECT_EQ(expected, actual) (but use (actual, expected) for e.g. _GT)
* Correct #include order
* Use anonymous namespaces in preference to "static" for file-scoping
* Eliminate unnecessary casts
* Update reference code in comments of ARM assembly sources to match actual current C code
* Fix indenting to be more style-guide compliant
* Use arraysize() in more places
* Use bool instead of int for "boolean" values (0/1)
* Shorten and simplify code
* Spaces around operators
* 80 column limit
* Use const more consistently
* Space goes after '*' in type name, not before
* Remove unnecessary return values
* Use "(var == const)", not "(const == var)"
* Spelling
* Prefer true, typed constants to "enum hack" constants
* Avoid "virtual" on non-overridden functions
* ASSERT(x == y) -> ASSERT_EQ(y, x)
BUG=none
R=andrew@webrtc.org, asapersson@webrtc.org, henrika@webrtc.org, juberti@webrtc.org, kjellander@webrtc.org, kwiberg@webrtc.org
Review URL: https://codereview.webrtc.org/1172163004
Cr-Commit-Position: refs/heads/master@{#9420}
This makes a variety of small changes to synchronize bits of code using different types, remove useless code or casts, and add explicit casts in some places previously doing implicit ones. For example:
* Change a few type declarations to better match how the majority of code uses those objects.
* Eliminate "< 0" check for unsigned values.
* Replace "(float)sin(x)", where |x| is also a float, with "sinf(x)", and similar.
* Add casts to uint32_t in many places timestamps were used and the existing code stored signed values into the unsigned objects.
* Remove downcasts when the results would be passed to a larger type, e.g. calling "foo((int16_t)x)" with an int |x| when foo() takes an int instead of an int16_t.
* Similarly, add casts when passing a larger type to a function taking a smaller one.
* Add casts to int16_t when doing something like "int16_t = int16_t + int16_t" as the "+" operation would implicitly upconvert to int, and similar.
* Use "false" instead of "0" for setting a bool.
* Shift a few temp types when doing a multi-stage calculation involving typecasts, so as to put the most logical/semantically correct type possible into the temps. For example, when doing "int foo = int + int; size_t bar = (size_t)foo + size_t;", we might change |foo| to a size_t and move the cast if it makes more sense for |foo| to be represented as a size_t.
BUG=none
R=andrew@webrtc.org, asapersson@webrtc.org, henrika@webrtc.org, juberti@webrtc.org, kwiberg@webrtc.org
TBR=andrew, asapersson, henrika
Review URL: https://codereview.webrtc.org/1168753002
Cr-Commit-Position: refs/heads/master@{#9419}
This makes some behaviorally-invariant changes to make certain code that
currently only works correctly with signed types work safely regardless of the
signedness of the types in question. This is preparation for a future change
that will convert a variety of types to size_t.
There are also some formatting changes (e.g. converting "enum hack" usage to real consts) to make it simpler to just change "int" to "size_t" in the future to change the types of those constants.
BUG=none
R=andrew@webrtc.org, juberti@webrtc.org, kwiberg@webrtc.org
TBR=ajm
Review URL: https://codereview.webrtc.org/1174813003
Cr-Commit-Position: refs/heads/master@{#9413}
Commit 7e0c7d49 ("Add support for external encoders in ACM") changed
things around so that we no longer recreate the speech encoder when
adding CNG or RED to an existing encoder. This isn't correct, since
those two expect to be in sync with the speech encoder they work with.
Solve the problem by resetting the speech encoder before hooking in
RED or CNG.
BUG=crbug/490368
R=jmarusic@webrtc.orgTBR=henrik.lundin@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/53589004
Cr-Commit-Position: refs/heads/master@{#9307}
Merge WEBRTC_ARCH_ARM64_NEON and WEBRTC_ARCH_ARM_NEON into one
WEBRTC_HAS_NEON.
Replace WEBRTC_DETECT_ARM_NEON by WEBRTC_DETECT_NEON.
Replace WEBRTC_ARCH_ARM by WEBRTC_ARCH_ARM64 for arm64 cpu.
BUG=4002
R=andrew@webrtc.org, jridges@masque.com, kjellander@webrtc.org
Change-Id: I870a4d0682b80633b671c9aab733153f6d95a980
Review URL: https://webrtc-codereview.appspot.com/49309004
Cr-Commit-Position: refs/heads/master@{#9228}
Before this change, a decoder was registered into ACMReceiver through
the CodecOwner; the CodecOwner had to have a pointer back to the
AudioCodingModuleImpl object to make this call. With this change, the
AudioCodingModuleImpl object asks the CodecOwner for a decoder pointer
instead, making the chain of calls more straightforward.
COAUTHOR=henrik.lundin@webrtc.org
BUG=4474
R=jmarusic@webrtc.org, minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/52439004
Cr-Commit-Position: refs/heads/master@{#9204}
