This change includes several improvements:
* VP8 configured with new rate control
* Detection of frame dropping, with qp bump for next frame
* Increased target and TL0 bitrates
* Reworked rate control (TL allocation) in screenshare_layers
A note on performance: PSNR and SSIM is expected to get slightly worse with this cl. Frame drops and delays should however improve.
BUG=4171
R=pbos@webrtc.org, stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1193513006.
Cr-Commit-Position: refs/heads/master@{#9495}
Verifies that reduced-size isn't configured in WebRtcVideoEngine2
without explicit configuration (which doesn't exist). Also disables REMB
in the default config because it requires reconfiguration.
Adds default-config tests to make sure that they don't contain
parameters that need to be negotiated between clients.
BUG=chromium:497103, webrtc:4745
R=mflodman@webrtc.org, stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1171533002
Cr-Commit-Position: refs/heads/master@{#9384}
BUG=4690
Changes:
1. In MediaEngineInterface changed CreateChannel() to CreateChannel(const AudioOptions&). Plan is to eventually remove Get/SetAudioOptions and the cousins SetDelayOffset and SetDevices.
2. In ChannelManager changed CreateVoiceChannel(...) to CreateVoiceChannel(..., const AudioOptions&).
3. In ChannelManager removed SetEngineAudioOptions, because it is not used and we want to eventually remove SetAudioOptions.
4. Updated MediaEngineInterface implementations and unit tests accordingly.
5. In WebRtcVoiceEngine changed access of Set/ClearOptionOverrides to protected. These are only used by WebRtcVoiceMediaChannel (now a friend). Plan is to rethink the logic behind option overrides.
6. Cosmetics: replaced NULL with nullptr in touched code
R=solenberg@google.com, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/56499004
Cr-Commit-Position: refs/heads/master@{#9330}
Addressing discrepancy where NACK used to be set from send codecs in
WebRtcVideoEngine(1), and before this change, from recv codecs in
WebRtcVideoEngine2. This should address that NACK might be sent even if
the remote side does not support it.
BUG=4626
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/53409004
Cr-Commit-Position: refs/heads/master@{#9171}
Fixes bug where Chromium would send REMB even though the remote party
doesn't announce support for it (because it was based on local codec
settings instead of remote ones).
BUG=4626
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/54389004
Cr-Commit-Position: refs/heads/master@{#9170}
This implementation registers RTX-APT map inside RTP sender and receiver.
While it only generates SDP with RTX associated with VP8 to make it
compatible with previous Chrome versions.
Should add following changes after reaches stable,
* Use RTX-APT map for building and restoring RTP packets.
* Add RTX support for RED or VP9 in Video engine.
* Set RTX payload type for RED inside FecConfig in EndToEndTest.
BUG=4024
R=mflodman@webrtc.org, pbos@webrtc.org, pthatcher@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/36889004
Cr-Commit-Position: refs/heads/master@{#9040}
All RTP packets from sender side will carry the rotation info. (will file a bug to track this) On the receiving side, only packets with marker bit set will be examined.
Tests completed:
1. android standalone to android standalone
2. android standalone to chrome (with and without this change)
3. android on chrome
BUG=4145
R=glaznev@webrtc.org, mflodman@webrtc.org, perkj@webrtc.org, pthatcher@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/47399004
Cr-Commit-Position: refs/heads/master@{#8905}
All these tests crashed before r8811. These tests should've been with
that change but r8811 was pushed in before to make bots green.
BUG=1788, 1667
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/48669004
Cr-Commit-Position: refs/heads/master@{#8881}
This means all channels within the same group will share the same pacing queue and scheduler. It also means padding will be computed and sent by a single pacer. To accomplish this I also introduce a PacketRouter which finds the RTP module which owns the packet to be paced out.
BUG=4323
R=mflodman@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/45549004
Cr-Commit-Position: refs/heads/master@{#8864}
Original cl description:
This removes the none const pointer entry and SwapFrame.
Since frames delivered using VideoSendStream no longer use the external capture module, VideoSendStream will not get an incoming framerate callback. VideoSendStream now uses a rtc::RateTracker.
Also, the video engine must ensure that time stamps are always increasing.
With this, time stamps (ntp, render_time and rtp timestamps ) are checked and set in ViECapturer::OnIncomingCapturedFrame
This cl was previously reverted in https://webrtc-codereview.appspot.com/46549004/.
Patchset 1 contains the original patch after rebase.
Patshet 2 fix webrtc_perf_tests reported in chromium:465306
Note that chromium:465287 is being fixed in https://webrtc-codereview.appspot.com/43829004/
BUG=1128
R=magjed@webrtc.org, mflodman@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/47629004
Cr-Commit-Position: refs/heads/master@{#8776}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8776 4adac7df-926f-26a2-2b94-8c16560cd09d
This removes the none const pointer entry and SwapFrame.
Since frames delivered using VideoSendStream no longer use the external capture module, VideoSendStream will not get an incoming framerate callback. VideoSendStream now uses a rtc::RateTracker.
Also, the video engine must ensure that time stamps are always increasing.
With this, time stamps (ntp, render_time and rtp timestamps ) are checked and set in ViECapturer::OnIncomingCapturedFrame
BUG=1128
R=magjed@webrtc.org, mflodman@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/46429004
Cr-Commit-Position: refs/heads/master@{#8633}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8633 4adac7df-926f-26a2-2b94-8c16560cd09d
Clang version changed 223108:230914
Details: e144d30..6fdb142/tools/clang/scripts/update.sh
Removes the OVERRIDE macro defined in:
* webrtc/base/common.h
* webrtc/typedefs.h
The majority of the source changes were done by running this in src/:
perl -0pi -e "s/virtual\s([^({;]*(\([^({;]*\)[^({;]*))(OVERRIDE|override)/\1override/sg" `find {talk,webrtc} -name "*.h" -o -name "*.cc*" -o -name "*.mm*"`
which converted all:
virtual Foo() OVERRIDE
functions to:
Foo() override
Then I manually edited:
* talk/media/webrtc/fakewebrtccommon.h
* webrtc/test/fake_common.h
Remaining uses of OVERRIDE was fixed by search+replace.
Manual edits were done to fix virtual destructors that were
overriding inherited ones.
Finally a build error related to the pure virtual definitions of
Read, Write and Rewind in common_types.h required a bit of
refactoring in:
* webrtc/common_types.cc
* webrtc/common_types.h
* webrtc/system_wrappers/interface/file_wrapper.h
* webrtc/system_wrappers/source/file_impl.cc
This roll should make it possible for us to finally re-enable deadlock
detection for TSan on the buildbots.
BUG=4106
R=pbos@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41069004
Cr-Commit-Position: refs/heads/master@{#8596}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8596 4adac7df-926f-26a2-2b94-8c16560cd09d
Instead enforcing that a voice engine is set on construction. Apart from
simplifying the class this permits tracing to be set up in the
constructor without worrying about racing sets from SetVoiceEngine
later.
BUG=
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/44489004
Cr-Commit-Position: refs/heads/master@{#8555}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8555 4adac7df-926f-26a2-2b94-8c16560cd09d
* Move constants into the files/functions that use them
* Declare variables in the narrowest scope possible
* Use correct (expected, actual) order for gtest macros
* Remove unused functions
* Untabify
* 80-column limit
* Avoid C-style casts
* Prefer true typed constants to "enum hack" constants
* Print size_t using the right format macro
* Shorten and simplify code
* Other random cleanup bits and style fixes
BUG=none
TEST=none
R=henrik.lundin@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/36179004
Cr-Commit-Position: refs/heads/master@{#8467}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8467 4adac7df-926f-26a2-2b94-8c16560cd09d
Modifies WebRtcVideoSendStream to use a default width/height of 16px.
This significantly reduces SetRemoteDescription time under
WebRtcVideoEngine2. Also preventing (expensive) reconfigurations due to
incoming frames when the channel is not sending yet.
Tests have been modified to generate a frame before expecting a certain
encoder size to have been configured.
Also adding tracing to WebRtcVideoSendStream::InputFrame as it can lead
to reconfigurations of the encoder which is expensive and it should show
up in chrome://tracing.
BUG=1788
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/42369004
Cr-Commit-Position: refs/heads/master@{#8381}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8381 4adac7df-926f-26a2-2b94-8c16560cd09d
