It depends on RTCP RPSI and SLI messages, which are being deleted.
TBR=stefan@webrtc.org # TODO comments added to common_types.h
BUG=webrtc:7338
Review-Url: https://codereview.webrtc.org/2753783002
Cr-Commit-Position: refs/heads/master@{#17314}
Moves webrtc/common_video/rotation.h and parts of
webrtc/common_video/include/video_frame_buffer.h and
webrtc/video_frame.h, and adds to a new GN target api:video_frame_api.
BUG=webrtc:5880
Review-Url: https://codereview.webrtc.org/2517173004
Cr-Commit-Position: refs/heads/master@{#15993}
This brings QualityScaler much more in line with OveruseFrameDetector.
The two classes are conceptually similar, and should be used in the
same way. The biggest changes in this CL are:
- Quality scaling is now only done in ViEEncoder and not in each
encoder implementation separately.
- QualityScaler now checks the average QP asynchronously, instead of
having to be polled on each frame.
- QualityScaler is no longer responsible for actually scaling the frames,
but has a callback to ViEEncoder that it uses to express it's desire
for lower resolution.
BUG=webrtc:6495
Review-Url: https://codereview.webrtc.org/2398963003
Cr-Commit-Position: refs/heads/master@{#15286}
This is yet another reland of https://codereview.webrtc.org/2434073003/
including two fixes:
1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that.
2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams.
Please review only the changes after patch set 1.
Original description:
Extract bitrate allocation of spatial/temporal layers out of codec impl.
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/2510583002 .
Cr-Commit-Position: refs/heads/master@{#15105}
Reason for revert:
Seems to be causing flakiness in perf test:
FullStackTest.ScreenshareSlidesVP8_2TL_LossyNet
Original issue's description:
> Reland of Issue 2434073003: Extract bitrate allocation ...
>
> This is a reland of https://codereview.webrtc.org/2434073003/ including
> some fixes for failing test cases.
>
> Original description:
>
> Extract bitrate allocation of spatial/temporal layers out of codec impl.
>
> This CL makes a number of intervowen changes:
>
> * Add BitrateAllocation struct, that contains a codec independent view
> of how the target bitrate is distributed over spatial and temporal
> layers.
>
> * Adds the BitrateAllocator interface, which takes a bitrate and frame
> rate and produces a BitrateAllocation.
>
> * A default (non layered) implementation is added, and
> SimulcastRateAllocator is extended to fully handle VP8 allocation.
> This includes capturing TemporalLayer instances created by the
> encoder.
>
> * ViEEncoder now owns both the bitrate allocator and the temporal layer
> factories for VP8. This allows allocation to happen fully outside of
> the encoder implementation.
>
> This refactoring will make it possible for ViEEncoder to signal the
> full picture of target bitrates to the RTCP module.
>
> BUG=webrtc:6301
>
> Committed: https://crrev.com/647bf43dcb2fd16fccf276bd94dc4400728bb405
> Cr-Commit-Position: refs/heads/master@{#15023}
TBR=mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2491393002
Cr-Commit-Position: refs/heads/master@{#15026}
This is a reland of https://codereview.webrtc.org/2434073003/ including
some fixes for failing test cases.
Original description:
Extract bitrate allocation of spatial/temporal layers out of codec impl.
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2488833004
Cr-Commit-Position: refs/heads/master@{#15023}
Reason for revert:
Breaks perf tests.
Original issue's description:
> Extract bitrate allocation of spatial/temporal layers out of codec impl.
>
> This CL makes a number of intervowen changes:
>
> * Add BitrateAllocation struct, that contains a codec independent view
> of how the target bitrate is distributed over spatial and temporal
> layers.
>
> * Adds the BitrateAllocator interface, which takes a bitrate and frame
> rate and produces a BitrateAllocation.
>
> * A default (non layered) implementation is added, and
> SimulcastRateAllocator is extended to fully handle VP8 allocation.
> This includes capturing TemporalLayer instances created by the
> encoder.
>
> * ViEEncoder now owns both the bitrate allocator and the temporal layer
> factories for VP8. This allows allocation to happen fully outside of
> the encoder implementation.
>
> This refactoring will make it possible for ViEEncoder to signal the
> full picture of target bitrates to the RTCP module.
>
> BUG=webrtc:6301
>
> Committed: https://crrev.com/8f46c679d24a05b3f08e02c6d91ec9637f34e24f
> Cr-Commit-Position: refs/heads/master@{#14998}
TBR=stefan@webrtc.org,perkj@webrtc.org,mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2489843002
Cr-Commit-Position: refs/heads/master@{#15001}
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2434073003
Cr-Commit-Position: refs/heads/master@{#14998}
Introduce a new method I420Buffer::CropAndScale, and a static
convenience helper I420Buffer::CenterCropAndScale. Use them for almost
all scaling needs.
Delete the Scaler class and the cricket::VideoFrame::Stretch* methods.
BUG=webrtc:5682
R=pbos@webrtc.org, perkj@webrtc.org, stefan@webrtc.org
Review URL: https://codereview.webrtc.org/2020593002 .
Cr-Commit-Position: refs/heads/master@{#13110}
The problem with gmock is worked around by commenting out any other override declarations in classes using gmock.
NOPRESUBMIT=True
BUG=webrtc:3970
Review-Url: https://codereview.webrtc.org/1921653002
Cr-Commit-Position: refs/heads/master@{#12563}
This makes it clearer this code not meant to be used as an API.
I could not find any use of this in downstream code.
BUG=webrtc:5095
TESTED=git cl try -c --bot=android_compile_rel --bot=linux_compile_rel --bot=win_compile_rel --bot=mac_compile_rel --bot=ios_rel --bot=linux_gn_rel --bot=win_x64_gn_rel --bot=mac_x64_gn_rel --bot=android_gn_rel -m tryserver.webrtc
R=stefan@webrtc.orgTBR=magjed@webrtc.org
Review URL: https://codereview.webrtc.org/1440873005 .
Cr-Commit-Position: refs/heads/master@{#10699}
The main purpose was the interface-> include rename, but other files
were also moved, eliminating the "main" dir.
To avoid breaking downstream, the "interface" directories were copied
into a new "video_coding/include" dir. The old headers got pragma
warnings added about deprecation (a very short deprecation since I plan
to remove them as soon downstream is updated).
Other files also moved:
video_coding/main/source -> video_coding
video_coding/main/test -> video_coding/test
BUG=webrtc:5095
TESTED=Passing compile-trybots with --clobber flag:
git cl try --clobber --bot=win_compile_rel --bot=linux_compile_rel --bot=android_compile_rel --bot=mac_compile_rel --bot=ios_rel --bot=linux_gn_rel --bot=win_x64_gn_rel --bot=mac_x64_gn_rel --bot=android_gn_rel -m tryserver.webrtc
R=stefan@webrtc.org, tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1417283007 .
Cr-Commit-Position: refs/heads/master@{#10694}
To avoid breaking downstream, the "interface" directories were copied
into a new "common_video/include" dir. The old headers got pragma
warnings added about deprecation (a very short deprecation since I plan
to remove them as soon downstream is updated).
The header guards are also identical to avoid mixing them up in the transition.
BUG=webrtc:5095
TESTED=Passing compile-trybots with --clobber flag:
git cl try --clobber --bot=win_compile_rel --bot=linux_compile_rel --bot=android_compile_rel --bot=mac_compile_rel --bot=ios_rel --bot=linux_gn_rel --bot=win_x64_gn_rel --bot=mac_x64_gn_rel --bot=android_gn_rel -m tryserver.webrtc
Review URL: https://codereview.webrtc.org/1418913006
Cr-Commit-Position: refs/heads/master@{#10659}
- "WebRTC.Video.QualityLimitedResolutionInPercent"
and if a frame is downscaled, the average number of times the frame is downscaled:
- "WebRTC.Video.QualityLimitedResolutionDownscales"
BUG=
Review URL: https://codereview.webrtc.org/1325153009
Cr-Commit-Position: refs/heads/master@{#10319}
It is just a pass through to webrtc/video_frame.h. Updated the callers
to include webrtc/video_frame.h instead and removed i420_video_frame.h.
This should fix pbos' TODO in i420_video_frame.h.
Tested on Linux with the following command lines:
$ rm -rf out/
$ ./webrtc/build/gyp_webrtc
$ ninja -C out/Debug
BUG=None
TEST=see above
R=magjed@webrtc.org, pbos@webrtc.org, tommi@webrtc.orgTBR=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/46819004
Patch from Thiago Farina <tfarina@chromium.org>.
Cr-Commit-Position: refs/heads/master@{#8973}
Now when we don't use SwapFrame consistently anymore, we need to recycle allocations with a buffer pool instead. This CL adds a buffer pool class, and updates the vp8 decoder to use it. If this CL lands successfully I will update the other video producers as well.
BUG=1128
R=stefan@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41189004
Cr-Commit-Position: refs/heads/master@{#8748}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8748 4adac7df-926f-26a2-2b94-8c16560cd09d
Allow for setting different cpu_speed setting based on resolution, for non-simulcast.
Use the existing low resolution simulcast cpu_speed setting for the non-simulcast case.
No change to simulcast behavior, unless top/highest layer stream is also below CIF resolution,
(in which case all layers will use lower the cpu_speed setting =-4).
BUG=
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37319004
Cr-Commit-Position: refs/heads/master@{#8603}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8603 4adac7df-926f-26a2-2b94-8c16560cd09d
